Uploaded February 2021 | Updated November 2026, 13 hours ago
Let's take a look at a few ways of creating this recess. Before diving into the video, I would recommend taking a look at the final model via the link below and give some thought about how you would approach this.
Public link to model (view only, non-downloadable)
a360.co/3qz1xy4
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
0:00 Intro
0:23 Starting shape
1:01 Simple top extrude
3:10 Right plane sketch, offset face.
4:42 Offset surface body
6:03 Pipe
7:27 Revolve and sweep
8:42 Reverse engineering
9:24 Sweep with spline
Let's take a look at a few ways of creating this recess. Before diving into the video, I would recommend taking a look at the final model via the link below and give some thought about how you would approach this.
Public link to model (view only, non-downloadable)
a360.co/3qz1xy4
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
0:00 Intro
0:23 Starting shape
1:01 Simple top extrude
3:10 Right plane sketch, offset face.
4:42 Offset surface body
6:03 Pipe
7:27 Revolve and sweep
8:42 Reverse engineering
9:24 Sweep with spline










