Uploaded November 2020 | Updated November 2026, 4 days ago
In this case study, we will focus on one single feature and experiment with different ways of creating it.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360casestudy
0:00 Intro
0:51 Cross sectional extrude
2:20 Extrude from top
4:26 Extrude from front
7:20 Split face + offset face [top]
8:26 Split face + thicken cut
9:21 Split face + offset face [front]
10:24 Split body + combine
12:10 Boundary fill
14:04 Sweep
14:52 Pipe
16:38 Emboss
In this case study, we will focus on one single feature and experiment with different ways of creating it.
If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360casestudy
0:00 Intro
0:51 Cross sectional extrude
2:20 Extrude from top
4:26 Extrude from front
7:20 Split face + offset face [top]
8:26 Split face + thicken cut
9:21 Split face + offset face [front]
10:24 Split body + combine
12:10 Boundary fill
14:04 Sweep
14:52 Pipe
16:38 Emboss










