Fusion 360 - Visualisation | Surface Patchwork @Fusion360School
Fusion 360 - Visualisation | Surface Patchwork  @Fusion360School
Uploaded December 2020 | Updated November 2026, 4 days ago
When you are not able to cut down from a simple extrude, what should you do next?

Take a look at the product pictures at the following link:
boschtools.com/us/en/boschtools-ocs/line-lasers-gll-100-g-145103-p

If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true

Any contribution can go towards improving the quality of the channel. Thank you.

#fusion360school
#fusion360surfacepatchwork
Fusion 360 - Visualisation | Surface PatchworkFusion Quick Bites #2Fusion 360 - Case Study 8Fusion 360 | Limited Staggered Slot PatternAutodesk Fusion | Mind The GapAutodesk Fusion | Sketch AutoConstrain (Commercial Subscription Only)Autodesk Fusion | Limited mesh patternFusion 360 | Extrude Presets (only with Product Design Extension)Fusion 360 | Master Model WorkflowFusion 360 | Groove on cylinder (with parallel side walls)Fusion 360 - Thicken CutFusion 360 - Fix Pattern on Path
Fusion 360 School |

Fusion 360 - Visualisation | Surface Patchwork

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER