Uploaded November 2017 | Updated November 2026, 3 hours ago
I upgraded two CD units for my mum using some recycled pine boards to turn them into one unit. This was a really simple woodworking project that could easily be done in a weekend. The pine boards came from an old desk my brother built a few years ago.
I used some georgian oak wood stain to colour the pine pretty much the same as the two CD units. One thing I should have done was to seal the end grain slightly to stop the stain soaking in too much, not only was it too dark on the ends but on one side it soaked into the face of the board from the end too. This made some brown streaks. Overall though I'm happy with it and it's now become a multipurpose unit.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to, thanks a lot!
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Instructables - instructables.com/member/timberanew
I upgraded two CD units for my mum using some recycled pine boards to turn them into one unit. This was a really simple woodworking project that could easily be done in a weekend. The pine boards came from an old desk my brother built a few years ago.
I used some georgian oak wood stain to colour the pine pretty much the same as the two CD units. One thing I should have done was to seal the end grain slightly to stop the stain soaking in too much, not only was it too dark on the ends but on one side it soaked into the face of the board from the end too. This made some brown streaks. Overall though I'm happy with it and it's now become a multipurpose unit.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to, thanks a lot!
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Instructables - instructables.com/member/timberanew
![Logo Carving into Maple [Wood carving]
Needing to put my mark on my projects and having a rather complicated and gimmicky logo has led me to making something simpler and sharper. This was carved from a piece of Maple using very simple hand tools.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Logo Carving into Maple [Wood carving]](https://i.ytimg.com/vi/6SG4cJaRI_k/mqdefault.jpg)
![Beech and Black Walnut Picture Frame [Woodworking Project]
I needed a Christmas Present for my sister so I made a Beech and Black Walnut picture frame to house a small painting I made for her. I used the glass and backing board from a cheap picture frame bought from a store and made some fun and pretty simple joinery to house all the parts.
The beech and black walnut really complement each other well and the addition of small beech dowels bring everything together. You could even make some square pegs for a different look or maybe even brass. The carving reads A happy ending cannot come in the middle of the story, a line from one of my sisters favourite movies The Last Unicorn.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Beech and Black Walnut Picture Frame [Woodworking Project]](https://i.ytimg.com/vi/6YpErAFbzzg/mqdefault.jpg)

![Hand Carved Welcome Sign from an Old Piece of Bed Frame [Wood Carving Project]
I wanted to make a sign to advertise some hand carved letters and some wood recycling. This welcome sign is cartoon/fantasy inspired and is carved to look like a scroll. It was created by gluing a few old pieces of bed frame together.
I carve these signs with a small selection of chisels and really you can achieve many different looks with fairly few inexpensive chisels. Whether it be letters carved into the wood or letters raised from the wood.
I used a small amount of Rustoleum Painters Touch paint to colour the letters much in the style of a woodcarver called Raymond Kinman, famous for his signs he has created for Disney.
Rag and Bone Browns Channel - https://www.youtube.com/channel/UCVyE_6jEtVZGmYGXtUOL5FQ
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/clintrosecarving
Facebook - https://www.facebook.com/clintrosecarving
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Hand Carved Welcome Sign from an Old Piece of Bed Frame [Wood Carving Project]](https://i.ytimg.com/vi/7Gs_Yd9nmXc/mqdefault.jpg)




![Shoe Rack Upgrade [Woodworking Project]
Our shoe rack was in dire need of an upgrade and clean up. I added an extra shelf and a couple of bag holders. This is a simple woodworking project which could easily be completed over a weekend.
The shelves were just held in place by small brackets, you could go one step closer and maybe make dadoes for the shelves to slot into. Ive had no issues with the sturdiness of the rack, no racking or movement and the shelves are holding strong. The only thing I would change is the bag holders, I had very limited space but I think Id make them a little wider and more roomy.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Shoe Rack Upgrade [Woodworking Project]](https://i.ytimg.com/vi/8arqomFLMc0/mqdefault.jpg)

