Uploaded January 2019 | Updated November 2026, 16 hours ago
I needed a Christmas Present for my sister so I made a Beech and Black Walnut picture frame to house a small painting I made for her. I used the glass and backing board from a cheap picture frame bought from a store and made some fun and pretty simple joinery to house all the parts.
The beech and black walnut really complement each other well and the addition of small beech dowels bring everything together. You could even make some square pegs for a different look or maybe even brass. The carving reads "A happy ending cannot come in the middle of the story", a line from one of my sisters favourite movies 'The Last Unicorn'.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
I needed a Christmas Present for my sister so I made a Beech and Black Walnut picture frame to house a small painting I made for her. I used the glass and backing board from a cheap picture frame bought from a store and made some fun and pretty simple joinery to house all the parts.
The beech and black walnut really complement each other well and the addition of small beech dowels bring everything together. You could even make some square pegs for a different look or maybe even brass. The carving reads "A happy ending cannot come in the middle of the story", a line from one of my sisters favourite movies 'The Last Unicorn'.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US

![Hand Carved Welcome Sign from an Old Piece of Bed Frame [Wood Carving Project]
I wanted to make a sign to advertise some hand carved letters and some wood recycling. This welcome sign is cartoon/fantasy inspired and is carved to look like a scroll. It was created by gluing a few old pieces of bed frame together.
I carve these signs with a small selection of chisels and really you can achieve many different looks with fairly few inexpensive chisels. Whether it be letters carved into the wood or letters raised from the wood.
I used a small amount of Rustoleum Painters Touch paint to colour the letters much in the style of a woodcarver called Raymond Kinman, famous for his signs he has created for Disney.
Rag and Bone Browns Channel - https://www.youtube.com/channel/UCVyE_6jEtVZGmYGXtUOL5FQ
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/clintrosecarving
Facebook - https://www.facebook.com/clintrosecarving
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Hand Carved Welcome Sign from an Old Piece of Bed Frame [Wood Carving Project]](https://i.ytimg.com/vi/7Gs_Yd9nmXc/mqdefault.jpg)




![Shoe Rack Upgrade [Woodworking Project]
Our shoe rack was in dire need of an upgrade and clean up. I added an extra shelf and a couple of bag holders. This is a simple woodworking project which could easily be completed over a weekend.
The shelves were just held in place by small brackets, you could go one step closer and maybe make dadoes for the shelves to slot into. Ive had no issues with the sturdiness of the rack, no racking or movement and the shelves are holding strong. The only thing I would change is the bag holders, I had very limited space but I think Id make them a little wider and more roomy.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Shoe Rack Upgrade [Woodworking Project]](https://i.ytimg.com/vi/8arqomFLMc0/mqdefault.jpg)



![Sapele Weather Vane [Woodworking Project] (Outdoor)
My Dad had his birthday recently and asked me to make him a weather vane from wood, something I had never even thought of making. So I got some of my reclaimed sapele and gave it a bash, its a bit of a different woodworking project but a lot of fun. I expect Ill have to adjust it a bit as it gets used to the outdoors but well see.
A small update 8 months on, the vane is still working but will soon need to be re oiled I think. Ill wait until the warmer weather in a month or so to do so. I think it would be best to re oil perhaps every 6 months or so.
https://www.amazon.com/shop/timberanew
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Etsy - https://www.etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Sapele Weather Vane [Woodworking Project] (Outdoor)](https://i.ytimg.com/vi/9PvijkuSgsY/mqdefault.jpg)