Uploaded June 2019 | Updated November 2026, 53 minutes ago
My Dad had his birthday recently and asked me to make him a weather vane from wood, something I had never even thought of making. So I got some of my reclaimed sapele and gave it a bash, its a bit of a different woodworking project but a lot of fun. I expect I'll have to adjust it a bit as it gets used to the outdoors but we'll see.
A small update 8 months on, the vane is still working but will soon need to be re oiled I think. I'll wait until the warmer weather in a month or so to do so. I think it would be best to re oil perhaps every 6 months or so.
amazon.com/shop/timberanew
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Etsy - etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
My Dad had his birthday recently and asked me to make him a weather vane from wood, something I had never even thought of making. So I got some of my reclaimed sapele and gave it a bash, its a bit of a different woodworking project but a lot of fun. I expect I'll have to adjust it a bit as it gets used to the outdoors but we'll see.
A small update 8 months on, the vane is still working but will soon need to be re oiled I think. I'll wait until the warmer weather in a month or so to do so. I think it would be best to re oil perhaps every 6 months or so.
amazon.com/shop/timberanew
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Etsy - etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US


![Bench Top Carving Table - Adjustable [ Wood Carving ]
I have some large panel wood carving projects coming up and wanted to make an adjustable carving table for the top of my workbench. In this video youll see how I build the carving table and the different considerations I took whilst making it.
The top is made from 25mm (1) thick plywood and the rest from construction pine and some recycled oak from locker room benches. One could probably make this a weekend woodworking project.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Skillshare - https://skillshare.com/user/timberanew
Instagram - @timberanew https://instagram.com/clintrosecarving
Facebook - https://www.facebook.com/clintrosecarving
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Bench Top Carving Table - Adjustable [ Wood Carving ]](https://i.ytimg.com/vi/9vrSNcUzr-Q/mqdefault.jpg)
![Turning a Cedar Dish on the Spring Pole Lathe [Traditional Woodworking]
I recently did a 12 hour live stream on Twitch to mark my two year anniversary and decided to do some turning on the spring pole lathe. I used a piece of cedar and made a small dish with the tools, knowledge (which is limited!) and the pedal lathe I had.
The hooked tool you see in the photo is a very old style of tool that has been used in green woodturning for hundreds (if not a thousand) years. I find it very hard to sharpen but Im hoping in the future I can get more used to it.
I know I need a lot more practice with this style of turning and I will improve in the future and perhaps make a full lathe when I have the room. Im currently still using my Spring Pole Bench Top Lathe I made a couple of years ago.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Folksy Shop - https://folksy.com/shops/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Turning a Cedar Dish on the Spring Pole Lathe [Traditional Woodworking]](https://i.ytimg.com/vi/AI8_tRSpnwg/mqdefault.jpg)






