Fuel injector leak test with maxx ecu diagnostic function @JMSpeedshop
Fuel injector leak test with maxx ecu diagnostic function  @JMSpeedshop
Uploaded August 2025 | Updated November 2026, 3 days ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter

After last weeks dyno session i did some driving,  Also doing some adjustments on the idle control.  Daniel from DW techsolution put the idle control in closed loop. Also put on the idle ignition lock function so it will control idle with the throttle body in combination with the ignition advance and retard

When the ignition lock function is on i have a crackle kind of sound out of the exhaust so so fuel is burned in the exhaust when im going of throttle.  So for example im driving like 2500rpm and shut the throttle to 0 % i hear crackle and pomps in the exhaust soe fuel is burned when i have 0% tps   

I have the overrun cut also activated some there should be no fuel injected. 

The can be just some fine tune of the when the idle should be activated but if can also be a leaking injector.  So to make sure it is just fine tuning i will pull up the fuel rail and the injectors and test them with the maxx ecu tuning software.

So i can put the fuelpump output on and off just like i want so i can check with fuel fuel pressure if a injector is leaking 

I can also under diagnostics menu selected a injector to be activated and see if the closing of the injector is 100% and no drops will be hanging on there.

I tested this both and there where no issues with the injectors so it is just some fine tuning

Why do i check this and not just only try to get this done with fine tuning is .  Because if you have a leaking injector it can make 1 cyl run rich so the total AFR can be influenced by this . and other cyl can be running a little lean. but also to much fuel in  cyl and create bore wash and damage the cyl Walls 

if there are any questions Just ask 

JMSpeedshop.com
Fuel injector leak test with maxx ecu diagnostic functionS124 v8 ofgear installed 95% wiring done “part 3”Mercedes S63 AMG 4-matic W222 585HP 900NMUpgrade to M113k Heads and Bigger turbo after 1e dyno sessionS124 V8 Turbo. Inlet piping + cooling lines inFirst legal Drive!!  Sound Check!!  Mercedes M113 TURBO !!Mercedes 190 V12 Prepare the car for paintingMaxx Ecu ignition & Injection output testing S124 V8 turboW201 V12 on it´s wheels for the first time !!! JMSpeedshop.comCustom SLS Hydraulic suspension working!! Mercedes W124 / S124M113 engine rebuild - Part 4 - best way to clean your pistons! MUST SEE !!W201 V12 is Almost there !!  all fluids are in
JMSpeedshop ! |

Fuel injector leak test with maxx ecu diagnostic function

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER