S124 V8 Turbo. Inlet piping + cooling lines in @JMSpeedshop
S124 V8 Turbo. Inlet piping + cooling lines in  @JMSpeedshop
Uploaded January 2022 | Updated November 2026, 3 days ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Patreon: patreon.com/jmspeeddshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter

New update on the project.  S124 V8 turbo

Have the inlet piping on the throttle body side also done. I have shortend the bend on the manifold because i needed more space for. Otherwise the connection and throttle body did not fit.  Welded a fix connection on it and made a support on the piping that is bolted on the oil cooler plate.

Also installed the oil cooler lines and the oil thermostate.  Final location is now on the driver side so the oil cooler for the transmission is moved to the passenger side.

The cooling lines for the radiator could not be used fro stock. it just did not fit.  the bottom hose needed a T piece.   Oem radiator from a S500 has a extra connection. That this radiator that i using from a W124 500e  does not have.  so i needed a T-piece.  this water is now going to the outlet of the heater valves. This will also be the highest point. so the overflow cap will be here.

Going to  leave the oem expansion tank.  and go with an overflow type. so seperate tank for overflow and backflow. These will be placed in the space where normally the battery is located.

For the next part. I want to finish everything in the enginebay. So try to make list of want needed to be test fitted before the engine will go out for the last time

if there are questions just ask

JMSpeedshop
S124 V8 Turbo. Inlet piping + cooling lines inFirst legal Drive!!  Sound Check!!  Mercedes M113 TURBO !!Mercedes 190 V12 Prepare the car for paintingMaxx Ecu ignition & Injection output testing S124 V8 turboW201 V12 on it´s wheels for the first time !!! JMSpeedshop.comCustom SLS Hydraulic suspension working!! Mercedes W124 / S124M113 engine rebuild - Part 4 - best way to clean your pistons! MUST SEE !!W201 V12 is Almost there !!  all fluids are inMercedes M113 V8 turbo  Support bracket made. S124 V8 Turbo600HP+ S124  V8 Turbo 860nm+  driving with the new tuneHOW TO: M113 intake manifold dissassembly Part1S124 V8 turbo engine out for the last time and repair underbody
JMSpeedshop ! |

S124 V8 Turbo. Inlet piping + cooling lines in

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER