Uploaded December 2024 | Updated September 2026, 1 week ago

---

This video demonstrates how too replace the oil filter adapter gasket on the Ford Superduty F-250, F-350 and Excursion equipped with the triton 6.8L V10 motor. This is a common issue on the Triton motor and usually develops an oil leak right behind the power steering pump and get's worse overtime. Ford claims the only way to replace this gasket is to remove the entire engine, but in this video I show how it can be down without engine removal. I also demonstrate how to replace the oil pressure sensor and how to drain/flush the cooling system and replace the thermostat. Most of the parts used in the video were purchased from Amazon and I will provide links to everything below.
Fel-Pro Oil Filter Adapter Gasket: amzn.to/4izyYMp
Gates Thermostat: amzn.to/3ZUbk68
Thermostat O Ring: amzn.to/4iyPEDR
Pennzoil Platnium 5w-20 5qt Jug: amzn.to/3Bjy8CV
Oil Filter: amzn.to/3ZFhwNO
Motorcraft Oil Pressure Sensor: amzn.to/41zqvms
Prestone Total Cooling System Cleaner: amzn.to/3ZUNrvh
Large Drain Pan: amzn.to/3Wm0rav

#fordsuperduty #fordexcursion #ford