Uploaded January 2026 | Updated September 2026, 1 week ago

---

This video demonstrates how to replace the fuel injection pressure regulator on the 1996-2002 GM 5.7 Vortec motor found in the K & C Series Chevy and GMC Trucks, Suburban, Tahoe, Yukon, Express, Savana, and Cadillac Escalade. Unfortunately the upper intake manifold needs to be removed in order to gain access to the fuel pressure regulator and I break it down step by step in this video. Replacement regulator along with gasket kit was purchased from Amazon and I will include links to everything below along with some of the other products and tools used in this video to help you through this procedure.
GM Fuel Pressure Regulator: amzn.to/4pS0E1z
Delphi Fuel Pressure Regulator (Alternative To GM Original): amzn.to/4sVnHeK
Fel-Pro Upper Intake Gasket Set: amzn.to/4roA29J
Replacement Upper Intake Manifold (If Needed): amzn.to/45Hu0sn
Intake Hat Gasket (if Needed): amzn.to/4q08Htm
PCV Valve (If Needed): amzn.to/4pO2Wic
Air Filter (If Needed): amzn.to/4pO2Wic
1/4" Magnetic 10mm Deep Socket: amzn.to/4sVpiBe
1/4" Magnetic 10mm Shallow Socket: amzn.to/4b5fGxa
1/4" Torque Wrench: amzn.to/3YLpGEu
T15 Torx Screwdriver: amzn.to/3ZnZjVi
Magnetic Pick Up Tool: amzn.to/4qGyojB
Pick Set: amzn.to/4qwSi0x
Throttle Body Cleaner: amzn.to/4pNJVMC
Brake Cleaner: amzn.to/4bDSKoY
Shop Towels: amzn.to/3NCcak4
Disposable Gloves: amzn.to/3Nwqg6D

#chevy #k1500 #gmc #chevytrucks #gmctrucks #obs #vortec #truckmaintenance #truckrepairs #diy