Uploaded August 2021 | Updated November 2026, 3 hours ago
00:00 - Introduction
00:48 - Door Panel Fastener Location & Removal
02:34 - Door Panel Removal
03:00 - Foam Barrier Removal
03:45 - Diagnosis of Failure
03:54 - Door Speaker, Impact Sensor, Door Pull Support & Wiring Harness Removal
04:46 - Interior Door Handle Removal
05:05 - Releasing Window From Regulator
05:25 - Window Regulator Removal
06:18 - Window Regulator Installation
07:25 - Window Motor Removal
07:33 - Window Motor Installation
08:05 - Installing Window To Regulator
08:39 - Interior Door Handle Installation
09:17 - Door Speaker, Impact Sensor, Door Pull Support & Wiring Harness Installation
09:54 - Foam Barrier Installation
10:04 - Door Panel Installation
11:01 - Door Fastener Installation(s)
Dorman Window Regulator Assembly (for 2008 Expedition):
amzn.to/3sUTTQE
Make sure to check fitment for your specific vehicle!
The regulator assembly does NOT come with a motor, you have to transer the existing motor. Here is a right, front motor for a 2008:
amzn.to/3mI8fTe
Make sure to check fitment for your specific vehicle!
In this video I'll be replacing the entire window regulator assembly on my 2008 Ford Expedition. The window wouldn't roll down and I was pretty sure it wasn't the window is off track. Once I removed the door panel I was able to easily diagnose the problem as a broken cable. This is a pretty easy job to do, should take about 45 - 60 minutes. I'll go through and show you how to perform this repair step by step from start to finish.
As an Amazon Affiliate I earn from qualifying purchases.
Thank you for stopping by and supporting my channel.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.
00:00 - Introduction
00:48 - Door Panel Fastener Location & Removal
02:34 - Door Panel Removal
03:00 - Foam Barrier Removal
03:45 - Diagnosis of Failure
03:54 - Door Speaker, Impact Sensor, Door Pull Support & Wiring Harness Removal
04:46 - Interior Door Handle Removal
05:05 - Releasing Window From Regulator
05:25 - Window Regulator Removal
06:18 - Window Regulator Installation
07:25 - Window Motor Removal
07:33 - Window Motor Installation
08:05 - Installing Window To Regulator
08:39 - Interior Door Handle Installation
09:17 - Door Speaker, Impact Sensor, Door Pull Support & Wiring Harness Installation
09:54 - Foam Barrier Installation
10:04 - Door Panel Installation
11:01 - Door Fastener Installation(s)
Dorman Window Regulator Assembly (for 2008 Expedition):
amzn.to/3sUTTQE
Make sure to check fitment for your specific vehicle!
The regulator assembly does NOT come with a motor, you have to transer the existing motor. Here is a right, front motor for a 2008:
amzn.to/3mI8fTe
Make sure to check fitment for your specific vehicle!
In this video I'll be replacing the entire window regulator assembly on my 2008 Ford Expedition. The window wouldn't roll down and I was pretty sure it wasn't the window is off track. Once I removed the door panel I was able to easily diagnose the problem as a broken cable. This is a pretty easy job to do, should take about 45 - 60 minutes. I'll go through and show you how to perform this repair step by step from start to finish.
As an Amazon Affiliate I earn from qualifying purchases.
Thank you for stopping by and supporting my channel.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.







