Uploaded March 2023 | Updated November 2026, 2 hours ago
As an Amazon Affiliate I earn from qualifying purchases.
Link to product used in this video:
Garage Door Rubber Seal: amzn.to/42sovdP
Over time my garage door developed a large gap along the bottom sides that was allowing snow, rain, leaves, bugs, whatever to get into the garage. Not to mention the draft of cold air that coming in through the gaps too. When I went to my local hardware stores all they carried was a 2 /12 inch (width when flat) seal. I called a few garage door companies in the area and they carried the wider seal but wanted $4 per foot, which is outrageous! I went over to Amazon and ordered this 4 1/2 inch seal and it fixed my bottom garage door gap problem. This is a pretty easy project and if you get a helper it shouldn't take long to do. The most challenging part will be feeding the new seal into the track - make sure to keep an eye on both sides while you do it. We spent about 30 minutes total and I wish I had done something about my garage door gaps much earlier because it has made a huge difference.
The rubber seal is made by Earthtec, it's 4 1/2" wide and 20 feet long. I had to cut mine to the proper length. The rubber seal has the Clopay t-end that slides into the track located along the bottom of the garage door. There may be different styles of track so make sure your seal has the t-end before ordering.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.
As an Amazon Affiliate I earn from qualifying purchases.
Link to product used in this video:
Garage Door Rubber Seal: amzn.to/42sovdP
Over time my garage door developed a large gap along the bottom sides that was allowing snow, rain, leaves, bugs, whatever to get into the garage. Not to mention the draft of cold air that coming in through the gaps too. When I went to my local hardware stores all they carried was a 2 /12 inch (width when flat) seal. I called a few garage door companies in the area and they carried the wider seal but wanted $4 per foot, which is outrageous! I went over to Amazon and ordered this 4 1/2 inch seal and it fixed my bottom garage door gap problem. This is a pretty easy project and if you get a helper it shouldn't take long to do. The most challenging part will be feeding the new seal into the track - make sure to keep an eye on both sides while you do it. We spent about 30 minutes total and I wish I had done something about my garage door gaps much earlier because it has made a huge difference.
The rubber seal is made by Earthtec, it's 4 1/2" wide and 20 feet long. I had to cut mine to the proper length. The rubber seal has the Clopay t-end that slides into the track located along the bottom of the garage door. There may be different styles of track so make sure your seal has the t-end before ordering.
DISCLAIMER: The information provided in this video is for educational and entertainment purposes only and should not be construed as professional advice. The creators, producers, and distributors of this video do not assume any responsibility or liability for any errors or omissions in the content of this video or for any damages arising from the use or reliance on the information presented in this video. Viewers should consult their own professional advisors for advice and guidance. The use of any information provided in this video is solely at the viewer's own risk.


