Uploaded October 2025 | Updated September 2026, 3 weeks ago
We all hate them, but at times they are the way to go as you saw me blowing up an airbag testing things my way lol
If you want to see this airbag video it is available on my website on SD Premium. So you’ll need to pay me at least $1 for the 14 day trial to see me screw up this bad lol
📘 Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
👉 https://linktr.ee/scannerdanner
🔧 Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a professional looking to sharpen your skills, join ScannerDanner Premium for next-level diagnostics training:
👉 Join Here – 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures straight from my book
*Exclusive case studies with live vehicles pulled into class
*Real-time troubleshooting using proven methods
*Post help requests on our forum
*Fundamental training on diagnosing automotive electrical and electronics systems.
ScannerDanner Tools:
https://linktr.ee/scannerdanner
⚠️ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.
We all hate them, but at times they are the way to go as you saw me blowing up an airbag testing things my way lol
If you want to see this airbag video it is available on my website on SD Premium. So you’ll need to pay me at least $1 for the 14 day trial to see me screw up this bad lol
📘 Want to Learn More About Diagnostics?
Check out my field manual, Engine Performance Diagnostics, available as both an eBook and paperback at:
👉 https://linktr.ee/scannerdanner
🔧 Looking for Deeper Training?
Whether you're a DIYer, an aspiring tech, or a professional looking to sharpen your skills, join ScannerDanner Premium for next-level diagnostics training:
👉 Join Here – 14 Days for $1
scannerdanner.com/join-scannerdanner-premium.html
On ScannerDanner Premium, you'll get:
*In-depth classroom lectures straight from my book
*Exclusive case studies with live vehicles pulled into class
*Real-time troubleshooting using proven methods
*Post help requests on our forum
*Fundamental training on diagnosing automotive electrical and electronics systems.
ScannerDanner Tools:
https://linktr.ee/scannerdanner
⚠️ Disclaimer:
ScannerDanner LLC is not responsible for misuse, unauthorized changes, or incorrect application of any information provided. Always follow proper safety protocols when using tools, equipment, or procedures discussed in this video. Use this content at your own risk.
![Why Wont This Jeep Start?? [Part 2]](https://i.ytimg.com/vi/Hjgs_8wX6Ks/mqdefault.jpg "Why Wont This Jeep Start?? [Part 2]
Here is the link to part 1 https://youtu.be/glYGv3CyVWU
Im sorry guys, I wasnt going to release this one until we had a true answer, but the customer is not returning emails or phone calls. From what I was told, it was taken to a dealer and the Jeep was confirmed to be running and back on the road. My friend Pete has tried to reach out to her multiple times, and I even emailed her personally, explaining the situation and she never got back to me either. I do not think she is angry with us as she wasnt even charged, so Im not sure why she wont communicate with us.
From your comments in part 1, here are two things that I would have tried:
1. leaving the battery disconnected and terminals jumped together overnight
2. disable the fuel pump, relieve system rest pressure through my fuel pressure gauge, clear the 3 flooded cylinders I can get to (again), then crank the engine over with no fuel pressure and bring fuel pressure back immediately if it fires up from residual fuel in the system
3. fool the ECM with engine temperature (alter the ECT signal) to where it thinks the engine is hot, to eliminate the cold start enrichment
The key with getting this to relearn, is to get the engine running. Alcohol % is calculated based off of the oxygen sensors and fuel trim after the PCM sees an increase in fuel level.
Im also not sure that the process I chose, with removing fuel, only to put that same fuel back in, was a good move as there was never any start-up period in between, which may have been needed.
Frustrated and disappointed would be how I feel about this one. If I ever get an update from this customer, I will post and pin the comment here.
ScannerDanner Tools:
https://www.scannerdanner.com/tools.html
https://www.amazon.com/shop/scannerdanner
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium https://www.scannerdanner.com/join-scannerdanner-premium.html There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.")
