My Tech Fun | Flex PEI sheet (310x310mm) by Creality3Dofficial.com @MyTechFun | Uploaded October 2022 | Updated October 2024, 2 hours ago.
Installation and testing of the Flex PEI sheet provided by Creality3DOfficial. Size of the sheet should be 310x310 but this one was 310x320 mm. The adhesion is tested with PLA, PETG and ABS filaments using my regular test object for this type of experiments.
Product link (affiliate):
creality3dofficial.com/products/flexible-pei-build-plate-for-for-cr-10-cr-10s?sca_ref=750123.XrJuB6OX&source=youtube
Test object downloadable from: mytechfun.com/video/231
Contents:
0:00 Introduction
1:46 Installation
3:36 Testing with PLA
5:02 Testing with PETG
5:54 Testing with ABS
6:52 Conclusions
#peisheet #creality #3dprinting
Installation and testing of the Flex PEI sheet provided by Creality3DOfficial. Size of the sheet should be 310x310 but this one was 310x320 mm. The adhesion is tested with PLA, PETG and ABS filaments using my regular test object for this type of experiments.
Product link (affiliate):
creality3dofficial.com/products/flexible-pei-build-plate-for-for-cr-10-cr-10s?sca_ref=750123.XrJuB6OX&source=youtube
Test object downloadable from: mytechfun.com/video/231
Contents:
0:00 Introduction
1:46 Installation
3:36 Testing with PLA
5:02 Testing with PETG
5:54 Testing with ABS
6:52 Conclusions
#peisheet #creality #3dprinting