Uploaded October 2026 | Updated November 2026, 3 hours ago
ENTER HERE → motionautotv.com
LAUNCH WEEK: Get 300X entries for a limited time! Grab a T-shirt or other eligible merch and you’re automatically entered for a chance to win.
PLUS: Our October VIP Shopping Spree has FIVE winners taking home $1,000 EACH! Join VIP to get in on the October promotion along with your Supra giveaway benefits.
Supra giveaway runs October 15–December 15, 2026. The 300X launch-week offer ends sooner, so don’t wait!
Would you have taken on this project? Let me know in the comments!
Instagram: @motionautotv
Snapchat : motionautotv
Vlog Channel @Trevor Jameson
Business Inquiries motionautotv@gmail.com
Getting the Toyota Supra restoration back on track! We are tackling the rust around the windows and hatch to prep for paint.
This MKIV Supra has been sitting, and it is definitely showing its age with some nasty rust underneath the rear quarter windows and the hatch. Since this is our current giveaway car, we cannot leave it like this. We are digging in to get the body work done right, which means a lot of sanding and some necessary welding to seal everything up before we move on to the next stage.
It is a tedious process, but getting this rust repair finished is the only way to get this thing ready for primer. We are putting in the work to make sure this car is solid for whoever wins it.
Are you excited to see this thing painted? Subscribe for more updates on the build, and let me know in the comments if you have ever tackled body work like this before!
ENTER HERE → motionautotv.com
LAUNCH WEEK: Get 300X entries for a limited time! Grab a T-shirt or other eligible merch and you’re automatically entered for a chance to win.
PLUS: Our October VIP Shopping Spree has FIVE winners taking home $1,000 EACH! Join VIP to get in on the October promotion along with your Supra giveaway benefits.
Supra giveaway runs October 15–December 15, 2026. The 300X launch-week offer ends sooner, so don’t wait!
Would you have taken on this project? Let me know in the comments!
Instagram: @motionautotv
Snapchat : motionautotv
Vlog Channel @Trevor Jameson
Business Inquiries motionautotv@gmail.com
Getting the Toyota Supra restoration back on track! We are tackling the rust around the windows and hatch to prep for paint.
This MKIV Supra has been sitting, and it is definitely showing its age with some nasty rust underneath the rear quarter windows and the hatch. Since this is our current giveaway car, we cannot leave it like this. We are digging in to get the body work done right, which means a lot of sanding and some necessary welding to seal everything up before we move on to the next stage.
It is a tedious process, but getting this rust repair finished is the only way to get this thing ready for primer. We are putting in the work to make sure this car is solid for whoever wins it.
Are you excited to see this thing painted? Subscribe for more updates on the build, and let me know in the comments if you have ever tackled body work like this before!






![Tools Stolen. Trailer Broken Into. SR20 240SX First Start!
What a week. Trailer got broken into in Indy—about $3,500 in Milwaukee tools and other gear GONE. THey messed up the door pretty bad, but The scooter survived (lol), the trailer survived, and we decided to lean into it:
🧰 This weekend only (Sept 13–14, 2025): we’re putting a tool in EVERY shipped order + 25× entries toward the S13 giveaway.
👉 Shop / Enter (25× entries): https://motionautotv.com
(Physical orders only; digital downloads excluded.)
In this episode: parts run at Harbor Freight + Home Depot, “tools-in-orders” haul, Type-X wing install, full Wiring Specialties engine & chassis harness, fuel pump hardwire, intercooler/radiator fitment, top-mount GTX3071R clearance fixes, custom downpipe & IC piping, battery relocation, and the SR20 first start.
Build bits you’ll see
Wiring Specialties S13 SR harness + fan & fuel-pump relay kits
DW400 pump + regulator, hardwire kit from wiring specialties
GREDDY intercooler & cat-back, Koyo triple-pass radiator, electric fans
GTX3071R top-mount, Cerakote’d cast manifold
Type-X wing, zinc hardware refresh
🙏 Thanks: Eric, Sean, Wiring Specialties crew, and everyone supporting the build.
00:00 What the [ ] — trailer break-in
01:05 Tools gone, scooter saved, damage walk-around
03:02 Weekend plan: Tools in Every Order (25× entries)
04:20 Harbor Freight + Home Depot haul (what’s going into orders)
08:10 Back at shop: Type-X wing install & paint correction
11:05 Old spaghetti harness vs Wiring Specialties clean setup
14:20 Fuel pump hardwire kit + tank refresh
17:10 Regulator/filter layout & E85 crust autopsy
19:45 Radiator + fan mockup (Koyo triple-pass)
22:30 Intercooler in without pulling the bumper (win)
24:10 Turbo/master cylinder clearance fix (banjo + spacer trick)
27:15 Battery relocation w/ breaker (safety note)
30:00 CAS/timing check + first crank for oil pressure
32:10 Low fuel pressure mystery → quick diagnosis
34:40 Fix → instant 100 psi test / proper base pressure
36:00 Cutting & clocking the IC pipes (speed density bung)
39:15 Custom downpipe (pie cuts, v-band, O2 bung)
42:10 Final wiring tidy + fan control
44:20 First Start! (exhaust note)
46:10 What’s next + weekend tool promo reminder Tools Stolen. Trailer Broken Into. SR20 240SX First Start!](https://i.ytimg.com/vi/R2AXflU4RS4/mqdefault.jpg)
![30 Hour Tow Test | Compound Turbo 6.7 Power Stroke Hauls 30,000 LBS to Deliver a Dream Car
📦 LAUNCH X431 PROS Elite 2025 Scanner Below
👉 https://www.amazon.com/dp/B092YL7M8P?maas=maas_adg_D04959BB18A2E4C5D8F4B92A86CBC480_afap_abs&ref aa_maas&tag=maas
🚚 30,000 lbs. | 1,800+ Miles | 30 Hours | 1 GIVEAWAY WINNER
We put our **compound turbo 6.7L Power Stroke** to the ultimate test—towing a MASSIVE trailer across the country to deliver our latest giveaway car, a clean SR20-swapped S14, straight to the winner’s hands in Connecticut.
This was the most intense tow test we’ve ever done. But this truck CRUSHED it.
➤ We started in Colorado, drove through Kansas, Missouri, Pennsylvania, and ended in Connecticut—all while hauling over 30,000 pounds
🎁 On the way, we picked up our *SR-swapped Datsun 510* and delivered the **giveaway S14** to Christopher Rodriguez—a long-time supporter and a guy who seriously deserved the win.
Oh, and we’re also teasing the *NEXT giveaway build*... 👀
📦 LAUNCH X431 PROS Elite 2025 Scanner Below
👉 https://www.amazon.com/dp/B092YL7M8P?maas=maas_adg_D04959BB18A2E4C5D8F4B92A86CBC480_afap_abs&ref aa_maas&tag=maas
(Using this link helps support the channel 🙌)
🎥 Chapters:
00:00 - Intro & Sensor Fix
03:45 - First Tow Test with the Compound Setup
09:40 - Weighing the Trailer
12:00 - Giveaway Car Pickup
14:20 - Stealing the Engine from My Childhood Datsun 😭
18:40 - Road Trip Mayhem Begins
26:00 - Fuel Stops, Trailer Issues & Long Hauls
32:20 - Meeting the Giveaway Winner
36:00 - First Drive & Reaction
38:00 - Teaser for the Next Build 🔧
Thanks for watching — subscribe so you don’t miss the next part of the build series!
🔧 Follow us on IG: @motionautotv
🧢 Merch & Giveaways: [motionautotv.com]
#67PowerStroke #CompoundTurbo #MotionAuto #DieselBuild #TowingTest #SR20 #RoadTrip 30 Hour Tow Test | Compound Turbo 6.7 Power Stroke Hauls 30,000 LBS to Deliver a Dream Car](https://i.ytimg.com/vi/Ran5pCLE1y4/mqdefault.jpg)


