Uploaded September 2026 | Updated November 2026, 3 hours ago
Fix PLC timer problems: when a timer isn't doing what you expect, sketch the timing diagram first, every time. Most timer bugs come from imagining the behavior instead of drawing it โ then watch it run in the simulator to be sure.
โก QUICK ANSWER
When a PLC timer isn't doing what you expect, sketch the timing diagram first, every time. Timers trip people up constantly, and it's usually because they're imagining the behavior in their head instead of drawing a timing diagram that shows exactly when the timer starts, when the done bit turns on, and what happens on reset. Memory is the quiet troublemaker here: get the retentive or memory behavior wrong and your machine remembers or forgets at exactly the wrong moment. The catch is that the timing of an output is a guess until you actually watch it, so after you draw the diagram, prove it. That's why I built the ACC PLC Simulator, and the traffic light scene is perfect for time sequencing, because a traffic light is just a timed sequence you can watch run. Draw the diagram, then watch it happen. Try it free at the link below.
๐ก THE TIMER FIX
โถ When a timer isn't doing what you expect, sketch the timing diagram FIRST
โถ Most timer bugs come from imagining the behavior instead of drawing it
โถ A timing diagram shows exactly when the timer starts, fires, and resets
โถ Memory is the quiet one โ get it wrong and the machine remembers or forgets at the wrong moment
โถ Output timing is a guess until you watch it โ so draw it, then prove it
๐น๏ธ WATCH TIME SEQUENCING RUN โ THE TRAFFIC LIGHT SCENE (FREE)
accautomation.ca/simulator
๐ FULL WRITE-UP + RESOURCES
accautomation.ca/the-biggest-obstacles-in-plc-programming-nobody-mentions
๐ WHAT YOU'LL LEARN
โ Why to sketch a timing diagram before troubleshooting a timer
โ Why imagining the behavior is where timer bugs come from
โ What a timing diagram shows you (start, done bit, reset)
โ Why retentive and memory behavior is the quiet troublemaker
โ How the traffic light scene lets you watch time sequencing run
โ FREQUENTLY ASKED
Q: My PLC timer isn't working right โ what do I do first?
A: Sketch the timing diagram. Draw when the timer starts, when the done bit turns on, and what happens on reset. Most timer bugs come from imagining the behavior instead of drawing it. Then watch it run to confirm.
Q: Why do retentive timers cause subtle bugs?
A: Because memory is the quiet one โ a retentive timer holds its accumulated time, so if you get that wrong, the machine remembers or forgets at exactly the wrong moment. Watch it in the simulator to be sure.
๐ Try it free: accautomation.ca/simulator
๐ MORE RESOURCES
๐ฎ Free ACC PLC Simulator (traffic light time sequencing, no install): accautomation.ca/simulator
โถ The Invisible Challenges of PLC Programming: youtube.com/shorts/Kc17x6TWpmY
โถ Master the PLC Scan Cycle With This Free Tool: youtube.com/shorts/lDZzRxTiH2s
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTimer #TimingDiagram #PLCSimulator #LearnPLC #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Fix PLC timer problems: when a timer isn't doing what you expect, sketch the timing diagram first, every time. Most timer bugs come from imagining the behavior instead of drawing it โ then watch it run in the simulator to be sure.
โก QUICK ANSWER
When a PLC timer isn't doing what you expect, sketch the timing diagram first, every time. Timers trip people up constantly, and it's usually because they're imagining the behavior in their head instead of drawing a timing diagram that shows exactly when the timer starts, when the done bit turns on, and what happens on reset. Memory is the quiet troublemaker here: get the retentive or memory behavior wrong and your machine remembers or forgets at exactly the wrong moment. The catch is that the timing of an output is a guess until you actually watch it, so after you draw the diagram, prove it. That's why I built the ACC PLC Simulator, and the traffic light scene is perfect for time sequencing, because a traffic light is just a timed sequence you can watch run. Draw the diagram, then watch it happen. Try it free at the link below.
๐ก THE TIMER FIX
โถ When a timer isn't doing what you expect, sketch the timing diagram FIRST
โถ Most timer bugs come from imagining the behavior instead of drawing it
โถ A timing diagram shows exactly when the timer starts, fires, and resets
โถ Memory is the quiet one โ get it wrong and the machine remembers or forgets at the wrong moment
โถ Output timing is a guess until you watch it โ so draw it, then prove it
๐น๏ธ WATCH TIME SEQUENCING RUN โ THE TRAFFIC LIGHT SCENE (FREE)
accautomation.ca/simulator
๐ FULL WRITE-UP + RESOURCES
accautomation.ca/the-biggest-obstacles-in-plc-programming-nobody-mentions
๐ WHAT YOU'LL LEARN
โ Why to sketch a timing diagram before troubleshooting a timer
โ Why imagining the behavior is where timer bugs come from
โ What a timing diagram shows you (start, done bit, reset)
โ Why retentive and memory behavior is the quiet troublemaker
โ How the traffic light scene lets you watch time sequencing run
โ FREQUENTLY ASKED
Q: My PLC timer isn't working right โ what do I do first?
A: Sketch the timing diagram. Draw when the timer starts, when the done bit turns on, and what happens on reset. Most timer bugs come from imagining the behavior instead of drawing it. Then watch it run to confirm.
Q: Why do retentive timers cause subtle bugs?
A: Because memory is the quiet one โ a retentive timer holds its accumulated time, so if you get that wrong, the machine remembers or forgets at exactly the wrong moment. Watch it in the simulator to be sure.
๐ Try it free: accautomation.ca/simulator
๐ MORE RESOURCES
๐ฎ Free ACC PLC Simulator (traffic light time sequencing, no install): accautomation.ca/simulator
โถ The Invisible Challenges of PLC Programming: youtube.com/shorts/Kc17x6TWpmY
โถ Master the PLC Scan Cycle With This Free Tool: youtube.com/shorts/lDZzRxTiH2s
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTimer #TimingDiagram #PLCSimulator #LearnPLC #Shorts
Regards,
Garry
ACC Automation
accautomation.ca

![PLC Mastering Instructions: Quick Guide [Tutorial]! ๐ช
Master PLC Mastering Instructions: Quick Guide [Tutorial]! ๐ช on the PLC. Step-by-step tutorial with real-world examples.
โก QUICK ANSWER
Modbus on the PLC maps remote coils and registers into local memory. Choose the port (Modbus RTU over RS-485 or Modbus TCP over Ethernet), match baud/parity/slave-ID on both ends, then use a read/write instruction to move holding registers and coils between devices.
๐ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
โฑ๏ธ TIMESTAMPS
0:00 - Introduction
0:00 - Adding Instructions
๐ WHAT YOULL LEARN
โ
PLC Mastering Instructions: Quick Guide [Tutorial]! ๐ช step by step on the PLC
โ
Comparison instructions for logic decisions
โ
Practical hands-on approach you can follow along
โ
Real-world tips from manufacturing experience
โ FREQUENTLY ASKED
Q: RTU or TCP โ which do I use?
A: RTU runs over RS-485 serial; TCP runs over Ethernet. Pick whichever your device supports. Both are shown in the full guide.
Q: Why wonโt my Modbus device respond?
A: Confirm baud rate, parity, and slave ID match exactly, and check A/B wiring polarity on RS-485.
๐ Full step-by-step, code & wiring diagrams: https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
๐ MORE RESOURCES
โถ Series: https://accautomation.ca/series/
โถ PLC Beginners Guide: https://accautomation.ca/programming/plc-beginners-guide/
โถ Free eBooks: https://accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: https://www.automationdirect.com/
โถ Parts Guide: https://www.accautomation.ca/purchase-find-parts/
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AutomationDirect #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
http://www.accautomation.ca PLC Mastering Instructions: Quick Guide [Tutorial]! ๐ช](https://i.ytimg.com/vi/yGnJwuLkP2M/mqdefault.jpg)




