Uploaded June 2020 | Updated November 2026, 3 hours ago
I formalized the breadboard version of the RADIG onto a metal plate including the RPI3. It will eventually have a power supply so that all circuits will operate from 12VDC as a source. I have two Mean Well DC to DC convertors whose output (each) is 5 VDC at 3 Amps. One will power the Rpi3 and the other the 7 Inch HDMI Display. On the input side anything from 9 to 18 VDC can be used with the Mean Well units.
This will be fun to operate from my back yard. Pete the Genius does it again!
I also intend to run 100 watts with my small CCI "leeneair".
73's
Pete N6QW
I formalized the breadboard version of the RADIG onto a metal plate including the RPI3. It will eventually have a power supply so that all circuits will operate from 12VDC as a source. I have two Mean Well DC to DC convertors whose output (each) is 5 VDC at 3 Amps. One will power the Rpi3 and the other the 7 Inch HDMI Display. On the input side anything from 9 to 18 VDC can be used with the Mean Well units.
This will be fun to operate from my back yard. Pete the Genius does it again!
I also intend to run 100 watts with my small CCI "leeneair".
73's
Pete N6QW










