Uploaded November 2026 | Updated November 2026, 15 hours ago
Creality Sparkx i8 vs. Snapmaker U1: same models, same filament brands and spools, 5 head-to-head PLA tests (print speed, purge waste, print quality). Budget bedslinger vs. CoreXY multi-toolhead. Honest pick at the end.
I ran the Creality Sparkx i8 and Snapmaker U1 side by side across 5 multi-color prints: Toothless in a hoodie, a Toucan, a 2-plate Christmas advent calendar, a detailed Fox, and a Hogwarts tower (purge weighed). Matched 0.2mm layer height and slicer settings where fair, with callouts on how infill purging changes the results.
━━━━━━━━━━━━━━━━━━━━━━
🛒 CREALITY SPARKX i8
━━━━━━━━━━━━━━━━━━━━━━
► Creality SparkX i8: crealityofficialstore.sjv.io/k4q1NL
► SPARKX i7 direct from Creality: crealityofficialstore.sjv.io/c/5142166/3791607/25652
► SPARKX i7 on Amazon: geni.us/IDV6JKl
════════════════════
🖨️ GEAR & FILAMENT
════════════════════
► E-Win desk (25% off code Pscape): tidd.ly/4vqJrz1
► BIQU filament: tidd.ly/4ukNtsZ
► Filament on Amazon: geni.us/BJx0Gdj
► Durozzle nozzles: https://www.durozzle.com?sca_ref=11858670.vqegiw13ZlM
━━━━━━━━━━━━━━━━━━━━━━
🛒 3D Printscape Etsy Shop
━━━━━━━━━━━━━━━━━━━━━━
► etsy.com/shop/3DPrintscapeStore
Disclosure: Some links may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you. Both printers in this video were purchased with my own money.
════════════════════
⏱️ CHAPTERS
════════════════════
0:00 Intro
0:15 Test Setup
0:44 Printer Differences
1:38 Printer Controls
2:13 Toothless Print Comparison
2:58 Toucans Print Comparison
3:27 Advent Calendar Comparison
4:20 Multicolor Fox Comparison
4:59 Hogwarts Castle Comparison
5:43 Final Result and Verdict
━━━━━━━━━━━━━━━━━━━━━━
🔔 SUBSCRIBE
━━━━━━━━━━━━━━━━━━━━━━
Practical 3D printing guides, reviews, and projects:
youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ
━━━━━━━━━━━━━━━━━━━━━━
💬 CONNECT
━━━━━━━━━━━━━━━━━━━━━━
▸ Discord: discord.gg/Bu94EYVkrU
▸ Patreon: patreon.com/3dprintscape
▸ Website: 3dprintscape.com
━━━━━━━━━━━━━━━━━━━━━━
🏷️ TAGS
━━━━━━━━━━━━━━━━━━━━━━
#CrealitySparkxi8 #SnapmakerU1 #MultiColor3DPrinting #3DPrinterComparison #3DPrinting
Creality Sparkx i8 vs. Snapmaker U1: same models, same filament brands and spools, 5 head-to-head PLA tests (print speed, purge waste, print quality). Budget bedslinger vs. CoreXY multi-toolhead. Honest pick at the end.
I ran the Creality Sparkx i8 and Snapmaker U1 side by side across 5 multi-color prints: Toothless in a hoodie, a Toucan, a 2-plate Christmas advent calendar, a detailed Fox, and a Hogwarts tower (purge weighed). Matched 0.2mm layer height and slicer settings where fair, with callouts on how infill purging changes the results.
━━━━━━━━━━━━━━━━━━━━━━
🛒 CREALITY SPARKX i8
━━━━━━━━━━━━━━━━━━━━━━
► Creality SparkX i8: crealityofficialstore.sjv.io/k4q1NL
► SPARKX i7 direct from Creality: crealityofficialstore.sjv.io/c/5142166/3791607/25652
► SPARKX i7 on Amazon: geni.us/IDV6JKl
════════════════════
🖨️ GEAR & FILAMENT
════════════════════
► E-Win desk (25% off code Pscape): tidd.ly/4vqJrz1
► BIQU filament: tidd.ly/4ukNtsZ
► Filament on Amazon: geni.us/BJx0Gdj
► Durozzle nozzles: https://www.durozzle.com?sca_ref=11858670.vqegiw13ZlM
━━━━━━━━━━━━━━━━━━━━━━
🛒 3D Printscape Etsy Shop
━━━━━━━━━━━━━━━━━━━━━━
► etsy.com/shop/3DPrintscapeStore
Disclosure: Some links may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you. Both printers in this video were purchased with my own money.
════════════════════
⏱️ CHAPTERS
════════════════════
0:00 Intro
0:15 Test Setup
0:44 Printer Differences
1:38 Printer Controls
2:13 Toothless Print Comparison
2:58 Toucans Print Comparison
3:27 Advent Calendar Comparison
4:20 Multicolor Fox Comparison
4:59 Hogwarts Castle Comparison
5:43 Final Result and Verdict
━━━━━━━━━━━━━━━━━━━━━━
🔔 SUBSCRIBE
━━━━━━━━━━━━━━━━━━━━━━
Practical 3D printing guides, reviews, and projects:
youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ
━━━━━━━━━━━━━━━━━━━━━━
💬 CONNECT
━━━━━━━━━━━━━━━━━━━━━━
▸ Discord: discord.gg/Bu94EYVkrU
▸ Patreon: patreon.com/3dprintscape
▸ Website: 3dprintscape.com
━━━━━━━━━━━━━━━━━━━━━━
🏷️ TAGS
━━━━━━━━━━━━━━━━━━━━━━
#CrealitySparkxi8 #SnapmakerU1 #MultiColor3DPrinting #3DPrinterComparison #3DPrinting










