Uploaded May 2013 | Updated November 2026, 1 day ago
This GFCI (Ground Fault Circuit Interrupter) only lasted about 6 months. I think that there are two possible things that could have burned it out. #1 the circuit seems to be poorly soldered and could have caused the electromagnet to stay on longer then it was designed for. #2 water could have gotten in the coil and causing it to draw to much current thus over loading the circuit and making it stay on long enough to burn out the electromagnet. Whatever the cause it seems that the electromagnet stayed on or received to much voltage. With out the electromagnet it can not be reset or can not trip.
If you have any suggestions or have experience I would like to hear from you! ;-)
Thank you for watching! transformer
This GFCI (Ground Fault Circuit Interrupter) only lasted about 6 months. I think that there are two possible things that could have burned it out. #1 the circuit seems to be poorly soldered and could have caused the electromagnet to stay on longer then it was designed for. #2 water could have gotten in the coil and causing it to draw to much current thus over loading the circuit and making it stay on long enough to burn out the electromagnet. Whatever the cause it seems that the electromagnet stayed on or received to much voltage. With out the electromagnet it can not be reset or can not trip.
If you have any suggestions or have experience I would like to hear from you! ;-)
Thank you for watching! transformer










