PaulsonTraining | Extrusion Blow Molding Part Quality and Problem Solving Part 2 @PaulsonTraining | Uploaded 8 years ago | Updated 12 minutes ago
This excerpt from Lesson #6 of Paulson Training's Extrusion Blow Molding Technology training program is titled "Blow Molding Part Quality and Problem Solving - Part 2".
More Paulson training videos are available for viewing at the Paulson Training TestDrive membership site. You can sign-up for free access here: http://plasticstrainingcenter.com/injection-molding-training-yt
Information on the complete Extrusion Blow Molding Technology training program can be found at:
http://www.paulsontraining.com/products/extrusion-blow-molding-technology
If you would like to see a demonstration of all of the video lessons in this course, visit our website and submit our Request Info form:
http://www.paulsontraining.com/get-started
Problem solving is key skill to have out on the extrusion blow molding production floor. Whether the problems are out-of-spec parts that the customer won't accepts of they are related to blow molding machine maintenance and downtime, product can come to a screeching halt. That is very expensive. So the more production floor personnel you have out on the floor on all 3 shifts, the better your position is to maximize output, quality and profit. The 7 lesson training program (10-12 hours) prepares your key production floor blow molders to quickly access and solve 95% of the problems that occur.
1. Develop a working knowledge of blow molding machinery
2. Evaluate and improve operating procedures
3. Recognize processing conditions that affect quality
4. Analyze and solve practical blow molding problems
Lesson 1 - The Process and the Equipment
Lesson 2 - Plastic Behavior
Lesson 3 - Extrusion Blow Molding Operating Controls
Lesson 4 - Operating Procedures - Start-up, Operation, and Shutdown
Lesson 5 - Part Quality and Problem Solving - Part 1
Lesson 6 - Part Quality and Problem Solving - Part 2
Lesson 7 - Parison Programming
More free Training available at:
http://plasticstrainingcenter.com/injection-molding-training-yt
This excerpt from Lesson #6 of Paulson Training's Extrusion Blow Molding Technology training program is titled "Blow Molding Part Quality and Problem Solving - Part 2".
More Paulson training videos are available for viewing at the Paulson Training TestDrive membership site. You can sign-up for free access here: http://plasticstrainingcenter.com/injection-molding-training-yt
Information on the complete Extrusion Blow Molding Technology training program can be found at:
http://www.paulsontraining.com/products/extrusion-blow-molding-technology
If you would like to see a demonstration of all of the video lessons in this course, visit our website and submit our Request Info form:
http://www.paulsontraining.com/get-started
Problem solving is key skill to have out on the extrusion blow molding production floor. Whether the problems are out-of-spec parts that the customer won't accepts of they are related to blow molding machine maintenance and downtime, product can come to a screeching halt. That is very expensive. So the more production floor personnel you have out on the floor on all 3 shifts, the better your position is to maximize output, quality and profit. The 7 lesson training program (10-12 hours) prepares your key production floor blow molders to quickly access and solve 95% of the problems that occur.
1. Develop a working knowledge of blow molding machinery
2. Evaluate and improve operating procedures
3. Recognize processing conditions that affect quality
4. Analyze and solve practical blow molding problems
Lesson 1 - The Process and the Equipment
Lesson 2 - Plastic Behavior
Lesson 3 - Extrusion Blow Molding Operating Controls
Lesson 4 - Operating Procedures - Start-up, Operation, and Shutdown
Lesson 5 - Part Quality and Problem Solving - Part 1
Lesson 6 - Part Quality and Problem Solving - Part 2
Lesson 7 - Parison Programming
More free Training available at:
http://plasticstrainingcenter.com/injection-molding-training-yt
