Uploaded June 2013 | Updated November 2026, 3 hours ago
Art. 9401
Stone saw ideal for cutting bricks, kerbs, tuff and all the different kind of material for the building sector.
Equipped with:
- Single phase engine 230V./50hz. 3,8Hp/2,8 Kw. with thermal and amperometrical protection
- Switch with release coil
- Overheat protection with manual reset
- Sliding working table and tilting cutting head
- Laser instrument
- Kit wheels
- Adjustable legs
- Adjustable goniometer fence
- Water recycling pump type S2
Max cutting length: 550 mm
Max cutting depth at 90°: 135 mm
Max cutting dept with 2 RUNS: 155 mm
Water cooled
Disk Ø 400 not included.
______________________________________________________________________
Segatrice adatta al taglio di mattoni, cordoli di cemento, tufo e tutti i differenti materiali tipici del cantiere edile.
Equipaggiata con:
- Motore monofase 230V./50hz. 3,8Hp/2,8 Kw. con protezione termica e amperometrica
- Interruttore di minima tensione
- Disgiuntore di corrente a riarmo manuale
- Carrello scorrevole e testa di taglio basculante
- Tracciatore laser
- Kit ruote
- Gambe regolabili
- Squadra goniometrica regolabile
- Pompa ricircolo acqua S2
Lunghezza max di taglio: 550 mm
Profondità max di taglio: 135 mm
Profondità max di taglio in 2 PASSATE: 155 mm
Lavora con acqua
Disco Ø400 non incluso
Art. 9401
Stone saw ideal for cutting bricks, kerbs, tuff and all the different kind of material for the building sector.
Equipped with:
- Single phase engine 230V./50hz. 3,8Hp/2,8 Kw. with thermal and amperometrical protection
- Switch with release coil
- Overheat protection with manual reset
- Sliding working table and tilting cutting head
- Laser instrument
- Kit wheels
- Adjustable legs
- Adjustable goniometer fence
- Water recycling pump type S2
Max cutting length: 550 mm
Max cutting depth at 90°: 135 mm
Max cutting dept with 2 RUNS: 155 mm
Water cooled
Disk Ø 400 not included.
______________________________________________________________________
Segatrice adatta al taglio di mattoni, cordoli di cemento, tufo e tutti i differenti materiali tipici del cantiere edile.
Equipaggiata con:
- Motore monofase 230V./50hz. 3,8Hp/2,8 Kw. con protezione termica e amperometrica
- Interruttore di minima tensione
- Disgiuntore di corrente a riarmo manuale
- Carrello scorrevole e testa di taglio basculante
- Tracciatore laser
- Kit ruote
- Gambe regolabili
- Squadra goniometrica regolabile
- Pompa ricircolo acqua S2
Lunghezza max di taglio: 550 mm
Profondità max di taglio: 135 mm
Profondità max di taglio in 2 PASSATE: 155 mm
Lavora con acqua
Disco Ø400 non incluso










