Uploaded February 2015 | Updated November 2026, 3 hours ago
Instructions for replacing the submersible water pump in Battipav electric machines
Please note:
Carry out these operations only with the machine completely disconnected from the mains power supply.
The procedure may vary depending on the model.
00:00 Intro
00:05 Remove the electrical panel cover
00:38 Remove the gasket
00:43 Disconnect the power supply connector
00:48 Disconnect the electrical connector terminals
00:55 Unscrew the safety locks
01:20 Remove the old water pump
01:29 Install the new water pump
01:46 Reconnect the power supply connector
01:51 Reinstall the gasket
02:00 Reconnect the electrical connector terminals
02:23 Tighten the safety locks
02:36 Reinstall the electrical panel cover
Instructions for replacing the submersible water pump in Battipav electric machines
Please note:
Carry out these operations only with the machine completely disconnected from the mains power supply.
The procedure may vary depending on the model.
00:00 Intro
00:05 Remove the electrical panel cover
00:38 Remove the gasket
00:43 Disconnect the power supply connector
00:48 Disconnect the electrical connector terminals
00:55 Unscrew the safety locks
01:20 Remove the old water pump
01:29 Install the new water pump
01:46 Reconnect the power supply connector
01:51 Reinstall the gasket
02:00 Reconnect the electrical connector terminals
02:23 Tighten the safety locks
02:36 Reinstall the electrical panel cover










