Uploaded November 2018 | Updated September 2026, 2 hours ago
I tried some different export settings but it made it jittery
Here's my latest 3" frame. The Bando Basher. A 3" low profile top deck mount.
Designed to house the Caddx Turtle or Runcam split mini. (Any 19mm camera) with dual 20x20 stack with an 18mm build height.
All the arms are removable and identical so a broken arm is easy to replace via 2 screws, without effecting the rest of the hardware. Both braces are removable and optional. But ive broken anything yet while fitted
The frame weight with hardware is about 54g. 2mm thick top, bottom, cam pod and braces with 3mm thick arms.
The frame is availble from the UK
droiddesignfpv.co.uk/products/bando-basher-3
And Armattan Productions
armattanproductions.com/pages/kit_detail/2009
Hglrc f440
Frsky xm+
Tx20 v2 vtx
Brotherhobby 1507 3600kv Avengers
Caddx Turtle
Gemfan 3052 props
Tattu 850 4s
I tried some different export settings but it made it jittery
Here's my latest 3" frame. The Bando Basher. A 3" low profile top deck mount.
Designed to house the Caddx Turtle or Runcam split mini. (Any 19mm camera) with dual 20x20 stack with an 18mm build height.
All the arms are removable and identical so a broken arm is easy to replace via 2 screws, without effecting the rest of the hardware. Both braces are removable and optional. But ive broken anything yet while fitted
The frame weight with hardware is about 54g. 2mm thick top, bottom, cam pod and braces with 3mm thick arms.
The frame is availble from the UK
droiddesignfpv.co.uk/products/bando-basher-3
And Armattan Productions
armattanproductions.com/pages/kit_detail/2009
Hglrc f440
Frsky xm+
Tx20 v2 vtx
Brotherhobby 1507 3600kv Avengers
Caddx Turtle
Gemfan 3052 props
Tattu 850 4s
