Uploaded January 2024 | Updated November 2026, 1 day ago
Two methods for OTA updates of sleeping ESPHome devices. These devices can be quite hard to catch awake for firmware/YAML updates... so, here are a couple of ways to do it. The first is automated using some built in Home Assistant tools, but I only know how to do that for ESPHome updates. For configuration updates, there's a manual method using a Home Assistant Helper to tell the ESPHome device to stay awake next time it wakes up.
The second method is the one I prefer. I got it from stevemann (Stephen Mann) on the HA forums. See post here for YAML: community.home-assistant.io/t/how-to-ota-flash-sleeping-esphome-sensor/298355/9
===Timestamps===
00:00 Introduction
00:40 Method 1: Automated version updates
01:14 Automation setup
02:48 Verify Automation (Traces)
03:45 Method 2: Manual Keep Awake
04:39 Set up HA Helper
06:30 YAML configuration
09:50 Log verification
10:17 Use toggle entity in Lovelace
11:03 Conclusion
Two methods for OTA updates of sleeping ESPHome devices. These devices can be quite hard to catch awake for firmware/YAML updates... so, here are a couple of ways to do it. The first is automated using some built in Home Assistant tools, but I only know how to do that for ESPHome updates. For configuration updates, there's a manual method using a Home Assistant Helper to tell the ESPHome device to stay awake next time it wakes up.
The second method is the one I prefer. I got it from stevemann (Stephen Mann) on the HA forums. See post here for YAML: community.home-assistant.io/t/how-to-ota-flash-sleeping-esphome-sensor/298355/9
===Timestamps===
00:00 Introduction
00:40 Method 1: Automated version updates
01:14 Automation setup
02:48 Verify Automation (Traces)
03:45 Method 2: Manual Keep Awake
04:39 Set up HA Helper
06:30 YAML configuration
09:50 Log verification
10:17 Use toggle entity in Lovelace
11:03 Conclusion






![Adding S5M2X raw support to Darktable
One small config adjustment and you can edit RW2 files in Darktable. This should work for the S5M2 (S5II) and S5M2X (S5IIX). Similar modifications might also work for other cameras and raw file formats, depending on what is actually in LibRaw.
Please be aware, this is a hack rather than official support, so there could be quirks or issues with the RAW conversion. Im doing this on Fedora 42, but it should be similar on other Linux versions.
On windows, you do the same thing: edit darktablerc.
Look in C:Users[username]AppDataLocaldarktabledarktablerc
Timestamps
0:00 Introduction
0:55 Why the hack works
2:45 Modifying darktablerc configs
3:57 Conclusion Adding S5M2X raw support to Darktable](https://i.ytimg.com/vi/m6IxawC4XCk/mqdefault.jpg)



