Uploaded March 2023 | Updated November 2026, 1 day ago
A Bluetooth Low Energy (BLE) Seeed Xiao ESP32-C3 powered scale, with an Android app for data logging. I used Arduino for the microcontroller programming, and MIT App Inventor for the Android App development.
The app will record data on command, chart it, store internally, write to external CSV file, and retrieve data from an external CSV file for display.
The original scale is a Greater Goods with 750g load cell
HX711 ADC
Seed Xiao ESP32-C3 microcontroller
OLED display 1.3" 128x64
Source code: github.com/techdregs/BLE-Logging-Scale
=== Timestamps ===
00:00 Introduction
01:19 Breaking down the scale
02:39 Battery and ADC install
03:20 Keeping the buttons
04:26 Integrating the display
05:24 Wiring
06:41 Brief code highlights
07:33 Scale overview
08:34 App overview
10:50 Conclusion
A Bluetooth Low Energy (BLE) Seeed Xiao ESP32-C3 powered scale, with an Android app for data logging. I used Arduino for the microcontroller programming, and MIT App Inventor for the Android App development.
The app will record data on command, chart it, store internally, write to external CSV file, and retrieve data from an external CSV file for display.
The original scale is a Greater Goods with 750g load cell
HX711 ADC
Seed Xiao ESP32-C3 microcontroller
OLED display 1.3" 128x64
Source code: github.com/techdregs/BLE-Logging-Scale
=== Timestamps ===
00:00 Introduction
01:19 Breaking down the scale
02:39 Battery and ADC install
03:20 Keeping the buttons
04:26 Integrating the display
05:24 Wiring
06:41 Brief code highlights
07:33 Scale overview
08:34 App overview
10:50 Conclusion



![Adding S5M2X raw support to Darktable
One small config adjustment and you can edit RW2 files in Darktable. This should work for the S5M2 (S5II) and S5M2X (S5IIX). Similar modifications might also work for other cameras and raw file formats, depending on what is actually in LibRaw.
Please be aware, this is a hack rather than official support, so there could be quirks or issues with the RAW conversion. Im doing this on Fedora 42, but it should be similar on other Linux versions.
On windows, you do the same thing: edit darktablerc.
Look in C:Users[username]AppDataLocaldarktabledarktablerc
Timestamps
0:00 Introduction
0:55 Why the hack works
2:45 Modifying darktablerc configs
3:57 Conclusion Adding S5M2X raw support to Darktable](https://i.ytimg.com/vi/m6IxawC4XCk/mqdefault.jpg)






