maker.moekoe | ESP32-S2 based universal reflow oven controller | assembly & tests | makermoekoe @makermoekoe | Uploaded April 2022 | Updated October 2024, 1 hour ago.
This video is sponsored by PCBWay. Get your own prototyping PCBs starting at 5$ here: pcbway.com/orderonline.aspx
Content:
0:28 Stenceling with the Stencil-Jig
1:17 PCB assembly
1:41 Hotplate soldering
2:18 Visual inspection & rework
3:08 OLED soldering
4:16 Oven unboxing & final assembly
7:06 Sponsor
7:28 Testing the reflow oven
The Reflow-Controller was built to control different kinds of reflow ovens, hotplates and whatever is coming to my mind in the future. It is based on the ESP32-S2 and thus can be programmed to be used with a WiFi App or whatever. Nevertheless, it has an onboard OLED display and three buttons included to be used as a standalone solution either. Furthermore it can control up to four independent outputs (for example 2x solid state relay & 2x cooling fan) and two thermocouple sensor inputs.
This project is fully available on my GitHub:
github.com/makermoekoe/Reflow-Controller
The mini oven I have used (Silvercrest SGB1200 F1):
lidl.de/p/silvercrest-kitchen-tools-grill-und-backautomat-sgb1200-f1/p100332026
Stencil-Jig:
youtube.com/watch?v=ioedhoP2OJQ
Assembly video of the automated hot plate soldering station:
youtube.com/watch?v=dwdYV_DlkiY
Black & green vacuum cleaner stencil box (Greetings to my friend Marius!):
youtube.com/watch?v=mEEo1tJj9D8
I'm now on Patreon! Your little help is appreciated a lot! Check it out here:
patreon.com/makermoekoe
Links:
Website: https://www.makermoekoe.com
Shop: tindie.com/stores/makermoekoe
Instagram: instagram.com/maker.moekoe
Patreon: patreon.com/makermoekoe
GitHub: github.com/makermoekoe
Instructables: instructables.com/member/moekoe
My commonly used tools: makermoekoe.com/tools-and-stuff-in-the-lab
This video is sponsored by PCBWay. Get your own prototyping PCBs starting at 5$ here: pcbway.com/orderonline.aspx
Content:
0:28 Stenceling with the Stencil-Jig
1:17 PCB assembly
1:41 Hotplate soldering
2:18 Visual inspection & rework
3:08 OLED soldering
4:16 Oven unboxing & final assembly
7:06 Sponsor
7:28 Testing the reflow oven
The Reflow-Controller was built to control different kinds of reflow ovens, hotplates and whatever is coming to my mind in the future. It is based on the ESP32-S2 and thus can be programmed to be used with a WiFi App or whatever. Nevertheless, it has an onboard OLED display and three buttons included to be used as a standalone solution either. Furthermore it can control up to four independent outputs (for example 2x solid state relay & 2x cooling fan) and two thermocouple sensor inputs.
This project is fully available on my GitHub:
github.com/makermoekoe/Reflow-Controller
The mini oven I have used (Silvercrest SGB1200 F1):
lidl.de/p/silvercrest-kitchen-tools-grill-und-backautomat-sgb1200-f1/p100332026
Stencil-Jig:
youtube.com/watch?v=ioedhoP2OJQ
Assembly video of the automated hot plate soldering station:
youtube.com/watch?v=dwdYV_DlkiY
Black & green vacuum cleaner stencil box (Greetings to my friend Marius!):
youtube.com/watch?v=mEEo1tJj9D8
I'm now on Patreon! Your little help is appreciated a lot! Check it out here:
patreon.com/makermoekoe
Links:
Website: https://www.makermoekoe.com
Shop: tindie.com/stores/makermoekoe
Instagram: instagram.com/maker.moekoe
Patreon: patreon.com/makermoekoe
GitHub: github.com/makermoekoe
Instructables: instructables.com/member/moekoe
My commonly used tools: makermoekoe.com/tools-and-stuff-in-the-lab