maker.moekoe | Yet another DIY 3D printed camera slider with linear bearings | Red Edition @makermoekoe | Uploaded March 2020 | Updated October 2024, 1 hour ago.
I tried building a small camera slider from some spare parts I found at home. As you can see in the end of the video, the linear bearings were not suitable for this kind of application. Maybe it will get better after "tuning" them, but I decided to go with another method. Keep up to date with my Instagram:
instagram.com/maker.moekoe
Thing files can be found here: thingiverse.com/thing:4252475
The threaded inserts which I have used in this video are from RUTHEX. For these M3 inserts I am using holes for the 3D parts with a diameter of 4,4mm.
Ruthex threaded insert bundle M3/M4/M5: amzn.to/39B1it9 (*)
Ruthex M3 threaded inserts: amzn.to/3bHFDRs (*)
Ruthex M4 threaded inserts: amzn.to/2QTXkVN (*)
Ruthex M5 threaded inserts: amzn.to/2ypTRbf (*)
For more informations to threaded inserts I can recommend a very detailed video from CNCKitchen:
youtube.com/watch?v=G-UF4tv3Hvc
Website: makermoekoe.com
Instagram: instagram.com/maker.moekoe
Instructables: https://www.instructables.com/member/...
My commonly used tools:
DIY Hotplate Soldering Iron: makermoekoe.com/2020/04/28/maker-moekoes-kind-of-soldering-iron
Yellow Third hand: amzn.to/2JqTNuc (*)
Reflow gun: amzn.to/349QsYX (*)
Paste Dispenser: https://www.aliexpress.com/item/32834...
Soldering Mat: amzn.to/2w2smUs (*) or amzn.to/2Pnx46B (*)
The links which are marked with a star (*) are affiliate links. This has either no effect on the product nor on its price, but by using this link I will get a small provision.
Music from:
epidemicsound.com
I tried building a small camera slider from some spare parts I found at home. As you can see in the end of the video, the linear bearings were not suitable for this kind of application. Maybe it will get better after "tuning" them, but I decided to go with another method. Keep up to date with my Instagram:
instagram.com/maker.moekoe
Thing files can be found here: thingiverse.com/thing:4252475
The threaded inserts which I have used in this video are from RUTHEX. For these M3 inserts I am using holes for the 3D parts with a diameter of 4,4mm.
Ruthex threaded insert bundle M3/M4/M5: amzn.to/39B1it9 (*)
Ruthex M3 threaded inserts: amzn.to/3bHFDRs (*)
Ruthex M4 threaded inserts: amzn.to/2QTXkVN (*)
Ruthex M5 threaded inserts: amzn.to/2ypTRbf (*)
For more informations to threaded inserts I can recommend a very detailed video from CNCKitchen:
youtube.com/watch?v=G-UF4tv3Hvc
Website: makermoekoe.com
Instagram: instagram.com/maker.moekoe
Instructables: https://www.instructables.com/member/...
My commonly used tools:
DIY Hotplate Soldering Iron: makermoekoe.com/2020/04/28/maker-moekoes-kind-of-soldering-iron
Yellow Third hand: amzn.to/2JqTNuc (*)
Reflow gun: amzn.to/349QsYX (*)
Paste Dispenser: https://www.aliexpress.com/item/32834...
Soldering Mat: amzn.to/2w2smUs (*) or amzn.to/2Pnx46B (*)
The links which are marked with a star (*) are affiliate links. This has either no effect on the product nor on its price, but by using this link I will get a small provision.
Music from:
epidemicsound.com
