ESP32-C3 Super Mini Running Hot? Simple Cooling Solutions Tested @ObengwareID
ESP32-C3 Super Mini Running Hot? Simple Cooling Solutions Tested  @ObengwareID
Uploaded November 2026 | Updated November 2026, 2 days ago
Fixing a Hot ESP32-C3 Super Mini: Adding a Heatsink

00:00 The ESP32-C3 Super Mini Heat Problem
00:13 Why Does the Board Get So Hot?
00:42 Testing Small Heatsinks with 3M Thermal Tape
01:29 Testing Longer Black Heatsinks & Results

Key Takeaways & Wi-Fi Heat Fixes:
- Heavy Wi-Fi active transmission is the primary cause of high temperatures.
- Adding a heatsink helps lower operating temps for improved stability in hot environments.
- Reduce heat via software: adjust WiFi.setTxPower(), enable Wi-Fi modem sleep, or utilize deep sleep cycles between transmissions.

The ESP32-C3 Super Mini is one of the most popular ESP32-C3 development boards among makers and IoT developers.
Its form factor is tiny and compact, it is inexpensive, and it supports both Wi-Fi and Bluetooth LE.

But there is one common complaint: the MCU gets quite hot.
Can we add a heatsink to cool down the ESP32-C3 Super Mini? Here is a summary of the experiments and findings.

The Problem The MCU ESP32-C3 Super MiniR uns Hot
The ESP32-C3 Super Mini has a very small PCB, which leaves little area for heat dissipation. The ESP32-C3 chip and nearby components, including the voltage regulator, sit close together on one small board with no cooling at all. As a result, MCU temperature can climb quite high while the board is running.

The Solution Tested: Heatsink with 3M Thermal Tape
The approach is simple: stick a small heatsink directly on top of the MCU.
Adhesive: 3M thermal tape. It both holds the heatsink in place and conducts heat from the chip surface into the heatsink, so no thermal paste or extra glue is needed.
Goal: lower the MCU temperature to around 55°C.

Experiment 1: Small Heatsink
In the first test, an ESP32-C3 Super Mini was fitted with a small heatsink and compared against the same board without one.

The board with the heatsink showed a lower MCU temperature than the board without.
The drop was modest, only slightly lower but effective.
Even so, the heatsink still helps the board run at a lower temperature.
This benefit matters most when the board is used in a hot environment, where a lower operating temperature helps maintain MCU operational stability.

Experiment 2: Longer (Black) Heatsink
The second experiment used a longer black heatsink.
A heatsink with more surface area generally dissipates heat better than a small one, but since the board is so small, size and placement must fit the enclosure and surrounding components.

The Main Cause of Heat: Wi-Fi
The key finding: the heat shows up when Wi-Fi is actively and intensively used.
The Wi-Fi radio, especially while transmitting, draws significant current, so the chip and regulator generate more heat.

Conversely, without Wi-Fi the ESP32-C3 Super Mini works very well, and temperature is much easier to keep under control.

Conclusion
1. The ESP32-C3 Super Mini can get quite hot, especially under heavy Wi-Fi use.
2. A heatsink attached with 3M thermal tape can lower MCU temperature, although a small heatsink only gives a slight reduction.
3. A heatsink is most useful in high-temperature environments to keep the MCU stable.
4. If your project does not need Wi-Fi, heat is practically a non-issue on this board.

Common ways ESP32 developers reduce heat besides using a heatsink:
Enable Wi-Fi power save / modem sleep so the radio is not constantly active.
Lower the Wi-Fi TX power when the access point is close, for example with WiFi.setTxPower() in the Arduino core.
Reduce the connection duty cycle: send data periodically, then turn Wi-Fi off or use deep sleep between transmissions.
Provide ventilation in the enclosure and keep the board away from other heat sources.
Note: temperature figures in this article follow those mentioned in the video (target of around 55°C). Actual results vary with ambient conditions, firmware, and Wi-Fi load.


#ESP32 #ESP32C3 #IoT #Electronics #Maker #Arduino #Heatsink #ThermalManagement #ESP32SuperMini
ESP32-C3 Super Mini Running Hot? Simple Cooling Solutions TestedMini pump power 5V DC SubmersibleFix USB 3.0 not active Enable BIOS xHCI Mode for USB 3.0 Get Super Speed USBSiaran TV Digital hilang hanya siaran kanal Radio cara memperbaiki ke siaran TVRealtime monitor Cyber Attack map in 60 secondsHow to Install Home Assistant on Windows 11 with Docker Desktop (Step-by-Step)Install Home Assistant Container Docker Armbian Bookworm S905x2 HACS Add onHow to Install Photoshop 26 2025 Autoplay exe fail to openParkir sepeda Gandaria City Jakarta SelatanCara pasang receiver TV digital DVB-T2 gambar lebih bersih dari TV analogError tls Bad Record Mac cant update - Arduino IDERecover lost partition drive RAW after wrong format parititon
Obengplus com |

ESP32-C3 Super Mini Running Hot? Simple Cooling Solutions Tested

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER