Uploaded September 2023 | Updated September 2026, 2 weeks ago
Micro Water Pump Submersible 5V DC Power USB
Power DC 5V, 300mAh (around)
The pump is inserted into the water
A micro water pump submersible 5V DC power USB is a small, lightweight pump that can be submerged in water. It is powered by a USB cable, making it easy to connect to a computer, power bank, or other USB power source.
This type of pump is often used in aquariums, fountains, and other water features. It can also be used for hydroponics, evaporative cooling, and other applications where a small, efficient pump is needed.
Features
Small and lightweight
Submersible in water
Powered by USB cable
Low noise
Applications
Aquariums
Fountains
Hydroponics
Evaporative cooling
Other water features
DIY project
How to use
Connect the USB cable to the pump.
Submerge the pump in water.
Turn on the power source.
Safety precautions:
Do not use the pump in water that is too hot or too cold.
Do not use the pump in water that contains chemicals or other substances that could damage the pump.
Do not allow the pump to run dry.
Specification micro pump
Operating voltage: 5V DC
Operating current: 100-200mA, test 300mA
Flow rate: 1.2-1.6L/min
Max height: 0.3-0.8m
Features: Submersible, waterproof, brushless motor, low noise
The pump will start to circulate water. The flow rate can be adjusted by changing the height of the pump in the water.
Mini pump like this very cheap. Only $1 each
Bad, cant longger operation.
Motor can suddenly stop working.
Just for test its ok
Recommendation , use mini pump 12V/DC is better.
Micro Water Pump Submersible 5V DC Power USB
Power DC 5V, 300mAh (around)
The pump is inserted into the water
A micro water pump submersible 5V DC power USB is a small, lightweight pump that can be submerged in water. It is powered by a USB cable, making it easy to connect to a computer, power bank, or other USB power source.
This type of pump is often used in aquariums, fountains, and other water features. It can also be used for hydroponics, evaporative cooling, and other applications where a small, efficient pump is needed.
Features
Small and lightweight
Submersible in water
Powered by USB cable
Low noise
Applications
Aquariums
Fountains
Hydroponics
Evaporative cooling
Other water features
DIY project
How to use
Connect the USB cable to the pump.
Submerge the pump in water.
Turn on the power source.
Safety precautions:
Do not use the pump in water that is too hot or too cold.
Do not use the pump in water that contains chemicals or other substances that could damage the pump.
Do not allow the pump to run dry.
Specification micro pump
Operating voltage: 5V DC
Operating current: 100-200mA, test 300mA
Flow rate: 1.2-1.6L/min
Max height: 0.3-0.8m
Features: Submersible, waterproof, brushless motor, low noise
The pump will start to circulate water. The flow rate can be adjusted by changing the height of the pump in the water.
Mini pump like this very cheap. Only $1 each
Bad, cant longger operation.
Motor can suddenly stop working.
Just for test its ok
Recommendation , use mini pump 12V/DC is better.
