Uploaded November 2023 | Updated September 2026, 2 weeks ago
#elegoo #3dprinting #pcbway
PCBWay: pcbway.com
To Purchase - shareasale.com/r.cfm?b=1680329&u=3212856&m=104244&urllink=&afftrack=
Is this the best budget LARGE Klipper 3D Printer? It is only $470 at the release of this video! What do you get for the price?
Profit 3D Filament -
profit3d.com/?AffId=2
clockspring3d.com
us.polymaker.com
sliceworx.com
printedsolid.com
Boring Calibration Cube -
thangs.com/designer/tripodsgarage
Print volume: 420*420*480mm
Max printing speed: 500 mm/s
11x11 (121) points auto leveling
Up to 300°C nozzle
Compatible with PLA/PETG/ABS/TPU/Nylon Filaments
WIFI/WLAN/USB transfer
The @ElegooOfficial Neptune 4 #cheap3dprinter #3dprinter
Comes pre-installed with Klipper firmware, with an ARM 64-bit 1.5G main frequency quad-core processor for faster command processing and execution, enabling it to print at an impressive speed of up to 500mm/s for higher efficiency. 8G RAM provides ample storage space for fast printing.
Additionally, the printer supports advanced features such as input shaping, which reduces mechanical vibrations in the printer's motion system and artifacts such as ringing, rippling, ghosting, or echoing on the printed model surface. The pressure advance function adjusts material flow according to printing speed, ensuring consistent pressure in the nozzle and reducing filament ooze or blobbing.
ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 420x420x480mm³
Pre-installed Klipper Firmware】With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models.
【Dual-Gear Direct Extruder】The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.
【300°C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.
【Auto Bed Leveling】The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.
【Efficient & Instant Cooling】The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 2x6025 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip, combined with an LED light on the nozzle for observing the model printing in a dark environment.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality #Neptune4 #budget3DPrinter Neptune 4 Max
#elegoo #3dprinting #pcbway
PCBWay: pcbway.com
To Purchase - shareasale.com/r.cfm?b=1680329&u=3212856&m=104244&urllink=&afftrack=
Is this the best budget LARGE Klipper 3D Printer? It is only $470 at the release of this video! What do you get for the price?
Profit 3D Filament -
profit3d.com/?AffId=2
clockspring3d.com
us.polymaker.com
sliceworx.com
printedsolid.com
Boring Calibration Cube -
thangs.com/designer/tripodsgarage
Print volume: 420*420*480mm
Max printing speed: 500 mm/s
11x11 (121) points auto leveling
Up to 300°C nozzle
Compatible with PLA/PETG/ABS/TPU/Nylon Filaments
WIFI/WLAN/USB transfer
The @ElegooOfficial Neptune 4 #cheap3dprinter #3dprinter
Comes pre-installed with Klipper firmware, with an ARM 64-bit 1.5G main frequency quad-core processor for faster command processing and execution, enabling it to print at an impressive speed of up to 500mm/s for higher efficiency. 8G RAM provides ample storage space for fast printing.
Additionally, the printer supports advanced features such as input shaping, which reduces mechanical vibrations in the printer's motion system and artifacts such as ringing, rippling, ghosting, or echoing on the printed model surface. The pressure advance function adjusts material flow according to printing speed, ensuring consistent pressure in the nozzle and reducing filament ooze or blobbing.
ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 420x420x480mm³
Pre-installed Klipper Firmware】With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models.
【Dual-Gear Direct Extruder】The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.
【300°C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.
【Auto Bed Leveling】The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For perfect first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.
【Efficient & Instant Cooling】The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 2x6025 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip, combined with an LED light on the nozzle for observing the model printing in a dark environment.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality #Neptune4 #budget3DPrinter Neptune 4 Max
