Uploaded January 2024 | Updated September 2026, 2 weeks ago
#xtool #laserengraver
To Purchase - xtool.com/?ref=if7I0mUlth-h&utm_medium=5306&utm_source=influencer
xTool S1 Automatic Conveyor Feeder -
* The working area of 118''×18.5'', along with the S1 Conveyor Feeder, totally makes batch engraving and cutting much easier.
* Automatic engraving path planning and material conveying; Farewell to manual material feeding and accuracy deviation.
* Easy Disassembly and Storage, Free Up Your Space
* Safety Materials: resistant to temperatures up to 600°C. breathable design of the processing area greatly reduces the burn marks.
* Add on kit (6 pairs of rails) supports 90 inches
@bobbalsmanjr Has been randomly picked as the winner and has 24hrs to respond
@xToollaser
xTool S1
This is an Approved by IEC Class 1 laser safety certification 20/40w enclosed laser engraver!
With safety features like!
① Full-enclosed: The xTool S1 features a fully enclosed, fire-resistant shell design, ensuring no laser leakage.
② Eye-friendly: A large, high-transparency cover offers excellent dual-wavelength filtering capabilities (diode laser and 1064nm Infrared laser), freeing you from cumbersome protective glasses while letting you clearly observe every step of the processing.
③ Powerful smoke exhaust: Robust smoke extraction safeguards your health. Additionally, it comes with an extremely powerful active exhaust fan that rapidly discharges harmful gases produced during laser processing, ensuring your safety and well-being.
① 5-direction flame detection: An enhanced 5-way(four baffles and a laser module) flame sensor system offers superior flame detection.
Accessories
Interchangeable laser modules, Riser Base and Automatic Conveyor Feeder.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #xtool #40watt 40 Watt laser #thangs.com #xtool #xtools1
#xtool #laserengraver
To Purchase - xtool.com/?ref=if7I0mUlth-h&utm_medium=5306&utm_source=influencer
xTool S1 Automatic Conveyor Feeder -
* The working area of 118''×18.5'', along with the S1 Conveyor Feeder, totally makes batch engraving and cutting much easier.
* Automatic engraving path planning and material conveying; Farewell to manual material feeding and accuracy deviation.
* Easy Disassembly and Storage, Free Up Your Space
* Safety Materials: resistant to temperatures up to 600°C. breathable design of the processing area greatly reduces the burn marks.
* Add on kit (6 pairs of rails) supports 90 inches
@bobbalsmanjr Has been randomly picked as the winner and has 24hrs to respond
@xToollaser
xTool S1
This is an Approved by IEC Class 1 laser safety certification 20/40w enclosed laser engraver!
With safety features like!
① Full-enclosed: The xTool S1 features a fully enclosed, fire-resistant shell design, ensuring no laser leakage.
② Eye-friendly: A large, high-transparency cover offers excellent dual-wavelength filtering capabilities (diode laser and 1064nm Infrared laser), freeing you from cumbersome protective glasses while letting you clearly observe every step of the processing.
③ Powerful smoke exhaust: Robust smoke extraction safeguards your health. Additionally, it comes with an extremely powerful active exhaust fan that rapidly discharges harmful gases produced during laser processing, ensuring your safety and well-being.
① 5-direction flame detection: An enhanced 5-way(four baffles and a laser module) flame sensor system offers superior flame detection.
Accessories
Interchangeable laser modules, Riser Base and Automatic Conveyor Feeder.
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #xtool #40watt 40 Watt laser #thangs.com #xtool #xtools1
