Uploaded June 2017 | Updated September 2026, 2 weeks ago
This is a flashlight that I made from an old electric razor. It's not old but replacement foils are not available. There is probably a way to get them but it's easier for me to just get a new one.
What I did here was first tear down the razor to this chassis and remove the motor. I took a large LED from a dead LED replacement module and cut a hole in the chassis of the razor for the LED and sealed it in the hole and soldered the wires. Buttoned everything back up and what you see is the results. Thanks for watching.
This is a flashlight that I made from an old electric razor. It's not old but replacement foils are not available. There is probably a way to get them but it's easier for me to just get a new one.
What I did here was first tear down the razor to this chassis and remove the motor. I took a large LED from a dead LED replacement module and cut a hole in the chassis of the razor for the LED and sealed it in the hole and soldered the wires. Buttoned everything back up and what you see is the results. Thanks for watching.
