Uploaded August 2026 | Updated September 2026, 2 weeks ago
Powered by PCBWay: pcbway.com
The EIBOS Tetras takes a different approach to multi-spool filament drying: four completely independent drying chambers in one modular system.
In this video, I take a detailed look at the new EIBOS Series X Tetras, including setup, controls, construction, AMS 2 Pro integration, and most importantly, how well those four individual chambers actually perform.
Rather than relying only on the temperatures shown on the Tetras displays, I placed an independent temperature probe inside each chamber and recorded all four channels simultaneously at one-minute intervals. This gives us a much better look at chamber-to-chamber consistency, heating performance, and what is actually happening inside the dryer.
The Tetras is rated at 60W per chamber / 240W for the complete four-chamber system and supports individual spools up to Ø205 × 68mm.
EIBOS Tetras Specifications
• Four independent drying chambers
• 60W rated power per chamber
• 240W rated power – complete unit
• Temperature operating range based on 25°C ambient
• Humidity measurement range: RH10%–99%
• Maximum spool size: Ø205 × 68mm
• Net weight: 4.0kg
• Overall height with AMS: 280mm
• Maximum height with cover open: 440mm
=============================
EIBOS
EIBOS Affiliate Link:
awin1.com/cread.php?awinmid=63566&awinaffid=2034265
EIBOS Tetras AMS 2 Pro Parts:
makerworld.com/en/models/2994542-eibos-tetras-ams-2-pro#profileId-3361368
=============================
EO3D MATERIAL TESTING DATABASE
testing.eo3dlabs.com
=============================
AMAZON STOREFRONT
Tools, equipment and products I use:
amazon.com/shop/edgeof3d
=============================
POLYMAKER
Polymaker Store:
shop.polymaker.com/EDGE_OF_3D
Discount Code: EDGE_OF_3D
=============================
SUPPORT EDGE OF 3D
Subscribe:
youtube.com/@EDGEOF3D/?sub_confirmation=1
Ko-fi:
ko-fi.com/edgeof3d
=============================
STAY CONNECTED
X / Twitter:
twitter.com/edgeof3d
Business Contact:
scott@eo3dlabs.com
=============================
Some links in this description are affiliate links. If you purchase through one of these links, EDGE OF 3D may receive a commission at no additional cost to you.
The information presented in this video represents my own testing, observations, and experience. Always perform your own research and follow the manufacturer's instructions and safety recommendations before using any product or material.
© EDGE OF 3D
#EIBOS #EIBOSTetras #FilamentDryer #FilamentDrying #3DPrinting #3DPrinter #AMS2Pro #Bambu
Powered by PCBWay: pcbway.com
The EIBOS Tetras takes a different approach to multi-spool filament drying: four completely independent drying chambers in one modular system.
In this video, I take a detailed look at the new EIBOS Series X Tetras, including setup, controls, construction, AMS 2 Pro integration, and most importantly, how well those four individual chambers actually perform.
Rather than relying only on the temperatures shown on the Tetras displays, I placed an independent temperature probe inside each chamber and recorded all four channels simultaneously at one-minute intervals. This gives us a much better look at chamber-to-chamber consistency, heating performance, and what is actually happening inside the dryer.
The Tetras is rated at 60W per chamber / 240W for the complete four-chamber system and supports individual spools up to Ø205 × 68mm.
EIBOS Tetras Specifications
• Four independent drying chambers
• 60W rated power per chamber
• 240W rated power – complete unit
• Temperature operating range based on 25°C ambient
• Humidity measurement range: RH10%–99%
• Maximum spool size: Ø205 × 68mm
• Net weight: 4.0kg
• Overall height with AMS: 280mm
• Maximum height with cover open: 440mm
=============================
EIBOS
EIBOS Affiliate Link:
awin1.com/cread.php?awinmid=63566&awinaffid=2034265
EIBOS Tetras AMS 2 Pro Parts:
makerworld.com/en/models/2994542-eibos-tetras-ams-2-pro#profileId-3361368
=============================
EO3D MATERIAL TESTING DATABASE
testing.eo3dlabs.com
=============================
AMAZON STOREFRONT
Tools, equipment and products I use:
amazon.com/shop/edgeof3d
=============================
POLYMAKER
Polymaker Store:
shop.polymaker.com/EDGE_OF_3D
Discount Code: EDGE_OF_3D
=============================
SUPPORT EDGE OF 3D
Subscribe:
youtube.com/@EDGEOF3D/?sub_confirmation=1
Ko-fi:
ko-fi.com/edgeof3d
=============================
STAY CONNECTED
X / Twitter:
twitter.com/edgeof3d
Business Contact:
scott@eo3dlabs.com
=============================
Some links in this description are affiliate links. If you purchase through one of these links, EDGE OF 3D may receive a commission at no additional cost to you.
The information presented in this video represents my own testing, observations, and experience. Always perform your own research and follow the manufacturer's instructions and safety recommendations before using any product or material.
© EDGE OF 3D
#EIBOS #EIBOSTetras #FilamentDryer #FilamentDrying #3DPrinting #3DPrinter #AMS2Pro #Bambu
