Uploaded May 2024 | Updated November 2026, 1 day ago
👉 Welcome to this tutorial where I demonstrate in a step-by-step manner how to effortlessly position your material for laser engraving using the 'Locate' button in LightBurn software.
This step-by-step guide will show you how to quickly and accurately locate your material, streamlining your workflow and enhancing precision. Perfect for beginners and seasoned users alike, this video will help you get the most out of your LightBurn experience.
What You Will Learn:
👉 How the "Locate" button in Lightburn software can make locating your engraving project so much easier than if you
👉 IA few more efficiency tricks for setting up a project for effective and efficient carving during discussion of how to use the Locate
Button and place your project.
Why Watch?
Enhance your ability to more efficiently and effectively place yoour cutting and engraving projects on you lasert bed. Time saver and comfort in knowing you are going to engrave in the right location.
Other Videos You May Want to Watch:
Using The Bullseye Method for CNC and Laser Engraving: youtu.be/d-cHOGTe28I?si=wseF_ysm267hkS5m
Playlist: Lightburn and Laser Tips and Tricks: youtube.com/playlist?list=PLbuKRLARGPOzBEyhkXXn4Wlb0-PVL-FEC&si=YYh68DegGVSOXUW2
⏰Timecodes⏰
00:00 Introduction
01:00 Open Lightburn Software to Demonstrate Process
01:55 Demonstrating Pushing Locate Button in Lightburn Software
02:55 Demonstrated aligning material with laser date after locating button pushed.
03:55 Demonstrating multiple checks with locate button for accurate placement
05:20 Setting up engraving process now that piece has been properly aligned.
06:00 Use of T1 and T2 Layers when setting up project
06:40 Engrave the saying on the teacher gifts
07:00 Start into second example with engraving laser picture
09:00 Alignment of material with no alignment marks on the material
10:30 Engraving a picture of a whale
10:55 Summary of the video
Other videos you may like can be found at this playlist (Vectric Tips and Tricks) : youtube.com/playlist?list=PLbuKRLARGPOy2UbY9OC_vOpEKNBjLZKT-&si=5P9dedbg122BQGQi
Don't forget to like, comment, and subscribe for more tutorials like this. Share your experiences and questions in the comments below the video, and let's build a community of knowledgeable CNC enthusiast.
This video is not sponsored.
All music supplied by Epidemicsound.com membership
Most of the resources I use in my CNC, Laser, 3D printing and other projects are listed on RobSandstromDesigns.com website and the below link will take you to these resources including links to the resources, clamps, bits, equipment, etc.
Resources Links: robsandstromdesigns.com/resources
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: https://www.instagram.com/robsandstro...
Facebook: https://www.facebook.com/robsandstrom...
I love to pass on knowledge and skills Learned. My quest with this channel is to Share knowledge and skills that I have obtained and Inspire others to learn new things and use that knowledge to make cool stuff. Don't let fear get in the way of success.
👉 Welcome to this tutorial where I demonstrate in a step-by-step manner how to effortlessly position your material for laser engraving using the 'Locate' button in LightBurn software.
This step-by-step guide will show you how to quickly and accurately locate your material, streamlining your workflow and enhancing precision. Perfect for beginners and seasoned users alike, this video will help you get the most out of your LightBurn experience.
What You Will Learn:
👉 How the "Locate" button in Lightburn software can make locating your engraving project so much easier than if you
👉 IA few more efficiency tricks for setting up a project for effective and efficient carving during discussion of how to use the Locate
Button and place your project.
Why Watch?
Enhance your ability to more efficiently and effectively place yoour cutting and engraving projects on you lasert bed. Time saver and comfort in knowing you are going to engrave in the right location.
Other Videos You May Want to Watch:
Using The Bullseye Method for CNC and Laser Engraving: youtu.be/d-cHOGTe28I?si=wseF_ysm267hkS5m
Playlist: Lightburn and Laser Tips and Tricks: youtube.com/playlist?list=PLbuKRLARGPOzBEyhkXXn4Wlb0-PVL-FEC&si=YYh68DegGVSOXUW2
⏰Timecodes⏰
00:00 Introduction
01:00 Open Lightburn Software to Demonstrate Process
01:55 Demonstrating Pushing Locate Button in Lightburn Software
02:55 Demonstrated aligning material with laser date after locating button pushed.
03:55 Demonstrating multiple checks with locate button for accurate placement
05:20 Setting up engraving process now that piece has been properly aligned.
06:00 Use of T1 and T2 Layers when setting up project
06:40 Engrave the saying on the teacher gifts
07:00 Start into second example with engraving laser picture
09:00 Alignment of material with no alignment marks on the material
10:30 Engraving a picture of a whale
10:55 Summary of the video
Other videos you may like can be found at this playlist (Vectric Tips and Tricks) : youtube.com/playlist?list=PLbuKRLARGPOy2UbY9OC_vOpEKNBjLZKT-&si=5P9dedbg122BQGQi
Don't forget to like, comment, and subscribe for more tutorials like this. Share your experiences and questions in the comments below the video, and let's build a community of knowledgeable CNC enthusiast.
This video is not sponsored.
All music supplied by Epidemicsound.com membership
Most of the resources I use in my CNC, Laser, 3D printing and other projects are listed on RobSandstromDesigns.com website and the below link will take you to these resources including links to the resources, clamps, bits, equipment, etc.
Resources Links: robsandstromdesigns.com/resources
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: https://www.instagram.com/robsandstro...
Facebook: https://www.facebook.com/robsandstrom...
I love to pass on knowledge and skills Learned. My quest with this channel is to Share knowledge and skills that I have obtained and Inspire others to learn new things and use that knowledge to make cool stuff. Don't let fear get in the way of success.

![Master the Moulding Toolpath in vCarve Pro | CNC Picture Frame Prep
In this step-by-step tutorial, I walk you through how to use the Moulding Toolpath in Vectric vCarve Pro to create custom moulding profiles using your CNC router. Whether you’re building custom picture frames, trim for cabinetry, or decorative woodworking pieces, mastering the moulding toolpath is a game-changer.
This video is part of my ongoing Picture Frame Making Series. In the previous video, I demonstrated how to build a simple no-frills picture frame. In today’s video, I focus on preparing moulding that will be featured in an upcoming video where we use it to build a more advanced and decorative frame.
👉 Chapters
00:00 Intro of Video
02:00 Overview of Moulding Toolpath
03:30 Start of Using Moulding Toolpath
13:00 Setting up Clearance Bit to Avoid Bit Damage
15:20 Demo of Using and Not Using Clearance Tool
20:!2 Settings in the Moulding Toolpath
22:00 Moulding Toolpath applied to a rectangle vector that is closed
27:00 Manipulating the Clipart vectors to change look of vector
29:00 Creating and Using Your Own Vector Design
31:45 Summary of Video
💬 Leave a comment if you have questions or want to see more advanced toolpath tutorials.
💬 Leave a comment if you think a live where I discuss and answer specific moulding toolpath questions would be helpful.
🔔 Subscribe for more CNC and woodworking tips: [Your Channel URL]
🌐 Visit my website for custom projects & tutorials: https://www.robsandstromdesigns.com
This video is not sponsored. The following links may be affiliate links. By using these links you are supporting this channel. Thank you.
Equipment and Software I Use
Equipment:
Laguna IQ CNC
CNC Design Software: vCarve Pro https://www.vectric.com/products/vcar...
Editing Software:
Camtasia: https://amzn.to/3TQv8nG
Camera: Sony a6700 https://amzn.to/3PALT3Q
DJIOsmo Pocket 3
Computer: MacBook Pro: https://amzn.to/3xhRTrO
Connect with me !
Website: https://robsandstromdesigns.com/
Instagram: https://www.instagram.com/robsandstrom/
Facebook: https://www.facebook.com/robsandstrom1 Master the Moulding Toolpath in vCarve Pro | CNC Picture Frame Prep](https://i.ytimg.com/vi/TSI8kAp_xH4/mqdefault.jpg)








