Uploaded November 2024 | Updated September 2026, 2 weeks ago
This is a fun project tutorial showing you how to make your own mixed media t-shirt on a 3d printer using a Wham Bam MUTANT. We use fabric markers in 3 colors to print a Wham Bam logo and then 3d print our Whammy Mascot in TPU directly on the t-shirt (but you can use any designs you like!).
🌎Learn more about the MUTANT Universal Tool Swap System: whambamsystems.com/pages/mutant
🛠Gcode settings for this project can be found here: bit.ly/tshirtgcode
📁Find the flat 'Bas Relief' version of Whammy here: cults3d.com/en/3d-model/gadget/bas-relief-whammy-mascot-for-wham-bam
🖍We are using our marker attachment for the MUTANT found here: thingiverse.com/thing:4877050
📏See our printer leveling video for more help in great levels: youtube.com/watch?v=RJC7N4Vb9AY&t
🧰For the TPU print, we are using a Creality CR-10 with a Bondtech BMG extruder and Slice Engineering Mosquito hot end.
🙌A special thank you to our 2024 summer intern, Sabal, for creating this great tutorial!
0:00 Introduction
0:41 Needed Items
1:25 3D CAD designs
2:01 Slicer Settings
2:12 Adjusting g-codes for fabric markers
3:15 Adjusting slicer settings for the marker prints
5:37 Adjusting settings for TPU prints
7:43 Adjusting g-codes for TPU prints
8:30 Positioning the t-shirt on the build plate
9:50 Leveling the printer
10:37 Marker printing
11:30 TPU printing
12:12 Finished product!
#3dprinting
This is a fun project tutorial showing you how to make your own mixed media t-shirt on a 3d printer using a Wham Bam MUTANT. We use fabric markers in 3 colors to print a Wham Bam logo and then 3d print our Whammy Mascot in TPU directly on the t-shirt (but you can use any designs you like!).
🌎Learn more about the MUTANT Universal Tool Swap System: whambamsystems.com/pages/mutant
🛠Gcode settings for this project can be found here: bit.ly/tshirtgcode
📁Find the flat 'Bas Relief' version of Whammy here: cults3d.com/en/3d-model/gadget/bas-relief-whammy-mascot-for-wham-bam
🖍We are using our marker attachment for the MUTANT found here: thingiverse.com/thing:4877050
📏See our printer leveling video for more help in great levels: youtube.com/watch?v=RJC7N4Vb9AY&t
🧰For the TPU print, we are using a Creality CR-10 with a Bondtech BMG extruder and Slice Engineering Mosquito hot end.
🙌A special thank you to our 2024 summer intern, Sabal, for creating this great tutorial!
0:00 Introduction
0:41 Needed Items
1:25 3D CAD designs
2:01 Slicer Settings
2:12 Adjusting g-codes for fabric markers
3:15 Adjusting slicer settings for the marker prints
5:37 Adjusting settings for TPU prints
7:43 Adjusting g-codes for TPU prints
8:30 Positioning the t-shirt on the build plate
9:50 Leveling the printer
10:37 Marker printing
11:30 TPU printing
12:12 Finished product!
#3dprinting
