Uploaded August 2020 | Updated November 2026, 3 days ago
This video is the second part of:
youtube.com/watch?v=jvmejxsQzn4&t=112s
In this video I do some DSP processing including:
- An echo and repeating echo
- Low and High Pass filters using the CMSIS library
- 0/90 degree phase shift filter
I connect the 0/90 degree audio output to the Tayloe mixer I built in this video:
youtube.com/watch?v=wBuIS3qCd1k&t=723s
One thing I forgot to mention is that I am injecting the 0 and 90 audio signal after the phase shift network on the board (which is unpopulated)
The filter coefficients were creating using the Iowa hills filter software:
iowahills.com
The code is all up on github:
github.com/thaaraak/F7-DSP
This video is the second part of:
youtube.com/watch?v=jvmejxsQzn4&t=112s
In this video I do some DSP processing including:
- An echo and repeating echo
- Low and High Pass filters using the CMSIS library
- 0/90 degree phase shift filter
I connect the 0/90 degree audio output to the Tayloe mixer I built in this video:
youtube.com/watch?v=wBuIS3qCd1k&t=723s
One thing I forgot to mention is that I am injecting the 0 and 90 audio signal after the phase shift network on the board (which is unpopulated)
The filter coefficients were creating using the Iowa hills filter software:
iowahills.com
The code is all up on github:
github.com/thaaraak/F7-DSP










