Uploaded March 2020 | Updated November 2026, 3 days ago
In this video I use the SA818 board which is a single board handheld with can transmit and receive on 2m (there is a 70cm version).
Documents for the SA818 are here
github.com/thaaraak/rda1846/tree/master/documents
I have read that this board does not meet FCC spectral purity rules I do plan on putting a lowpass filter before transmitting which I haven't done yet. The board itself is available from various sellers - here for example
banggood.com/SA818-VHF-Ultra-High-Frequency-1W-Wireless-Walkie-talkie-Module-Intercom-Module-Embedded-p-1411562.html?cur_warehouse=CN
The code is very straighforward
github.com/thaaraak/rda1846/tree/master/SA818
but I would have gotten nowhere without this repo:
github.com/darkbyte-ru/SA818
The 2560 connects to the SA818 via the Serial1 pins. I also have a simple audio amp after the SA818 based around an LM386
In this video I use the SA818 board which is a single board handheld with can transmit and receive on 2m (there is a 70cm version).
Documents for the SA818 are here
github.com/thaaraak/rda1846/tree/master/documents
I have read that this board does not meet FCC spectral purity rules I do plan on putting a lowpass filter before transmitting which I haven't done yet. The board itself is available from various sellers - here for example
banggood.com/SA818-VHF-Ultra-High-Frequency-1W-Wireless-Walkie-talkie-Module-Intercom-Module-Embedded-p-1411562.html?cur_warehouse=CN
The code is very straighforward
github.com/thaaraak/rda1846/tree/master/SA818
but I would have gotten nowhere without this repo:
github.com/darkbyte-ru/SA818
The 2560 connects to the SA818 via the Serial1 pins. I also have a simple audio amp after the SA818 based around an LM386










