Uploaded May 2026 | Updated September 2026, 5 days ago
Honda CR-V leaking oil? Before spending hundreds of dollars on an oil pan reseal, check the oil filter housing gasket first.
In this video I show how to replace the oil filter housing gaskets on a 2013 Honda CR-V LX with the 2.4L engine. This is a common leak point and can often be repaired with an inexpensive gasket set.
In this step-by-step DIY repair I cover:
🔧 Raising and securing the vehicle
🔧 Draining the engine oil
🔧 Removing the oil filter housing
🔧 Replacing the MAHLE GS33532 gasket set
🔧 Proper gasket lubrication and installation
🔧 Oil filter replacement
🔧 New crush washer installation
🔧 Oil drain bolt torque
🔧 Oil filter housing torque sequence
🔧 Refilling with 4.2 quarts of 0W-20 oil
🔧 Final leak inspection and verification
Parts Used:
✅ MAHLE Original Engine Oil Filter Adapter Gasket GS33532
✅ Honda Oil Filter Housing 15310-R40-A00 (reference)
✅ New Honda Crush Washer
If this video helped you save money, please consider subscribing and sharing it with another Honda owner.
Spec List:
2013 Honda CR-V 2.4L Oil Filter Housing Replacement
- Oil Capacity: 4.2 US quarts (with filter change)
amzn.to/4ebGtc5
- Oil Type: 0W-20 (all temperatures)
amzn.to/4ebGtc5
- Oil Filter Torque: Hand-tighten or 12 N·m (9 lb-ft)
amzn.to/4wZ2H8K
- Drain Bolt Socket: 17mm
- Crush Washer: Honda #94109-14000
amzn.to/4eeodig
- MAHLE GS33592 Gasket kit
amzn.to/4uFsjFZ
- Drain Bolt Torque: 30 lb-ft
Oil Filter Housing Bolts (3 Bolts)
- Hand-tighten first in a star pattern
- Torque to 11 lb-ft in a star pattern
- Final torque: 16 lb-ft in star pattern
TOOLS NEEDED
- Oil catch basin
amzn.to/43Ew2rw
- JIS#2 / Phillips screwdriver
amzn.to/4fQiDUB
- 14mm socket/wrench (metal support strap)
- 12mm socket (oil filter housing bolts)
- 17mm socket (drain bolt)
- Body clip pry bar
- Torque wrench
- Long Wrenches + Ratchet + extension
amzn.to/4fPMlZU
- Gloves + shop towels + Brake Clean
#hondacrv #honda #OilLeak #hondarepair #diyautorepair #mechanic #carrepair #K24 #hondamaintenance #OilFilterHousing #HondaDIY #autorepair #diymechanic #EdTheOldTechGuy
#howto
My buddies!
@PowerStrokeJude @J-WHO312 @DaleLucid
Honda CR-V leaking oil? Before spending hundreds of dollars on an oil pan reseal, check the oil filter housing gasket first.
In this video I show how to replace the oil filter housing gaskets on a 2013 Honda CR-V LX with the 2.4L engine. This is a common leak point and can often be repaired with an inexpensive gasket set.
In this step-by-step DIY repair I cover:
🔧 Raising and securing the vehicle
🔧 Draining the engine oil
🔧 Removing the oil filter housing
🔧 Replacing the MAHLE GS33532 gasket set
🔧 Proper gasket lubrication and installation
🔧 Oil filter replacement
🔧 New crush washer installation
🔧 Oil drain bolt torque
🔧 Oil filter housing torque sequence
🔧 Refilling with 4.2 quarts of 0W-20 oil
🔧 Final leak inspection and verification
Parts Used:
✅ MAHLE Original Engine Oil Filter Adapter Gasket GS33532
✅ Honda Oil Filter Housing 15310-R40-A00 (reference)
✅ New Honda Crush Washer
If this video helped you save money, please consider subscribing and sharing it with another Honda owner.
Spec List:
2013 Honda CR-V 2.4L Oil Filter Housing Replacement
- Oil Capacity: 4.2 US quarts (with filter change)
amzn.to/4ebGtc5
- Oil Type: 0W-20 (all temperatures)
amzn.to/4ebGtc5
- Oil Filter Torque: Hand-tighten or 12 N·m (9 lb-ft)
amzn.to/4wZ2H8K
- Drain Bolt Socket: 17mm
- Crush Washer: Honda #94109-14000
amzn.to/4eeodig
- MAHLE GS33592 Gasket kit
amzn.to/4uFsjFZ
- Drain Bolt Torque: 30 lb-ft
Oil Filter Housing Bolts (3 Bolts)
- Hand-tighten first in a star pattern
- Torque to 11 lb-ft in a star pattern
- Final torque: 16 lb-ft in star pattern
TOOLS NEEDED
- Oil catch basin
amzn.to/43Ew2rw
- JIS#2 / Phillips screwdriver
amzn.to/4fQiDUB
- 14mm socket/wrench (metal support strap)
- 12mm socket (oil filter housing bolts)
- 17mm socket (drain bolt)
- Body clip pry bar
- Torque wrench
- Long Wrenches + Ratchet + extension
amzn.to/4fPMlZU
- Gloves + shop towels + Brake Clean
#hondacrv #honda #OilLeak #hondarepair #diyautorepair #mechanic #carrepair #K24 #hondamaintenance #OilFilterHousing #HondaDIY #autorepair #diymechanic #EdTheOldTechGuy
#howto
My buddies!
@PowerStrokeJude @J-WHO312 @DaleLucid









![DIY Strut Replacement | 2008–2012 Honda Accord (Front, Part 1)
📹 Watch this 3-minute, no-nonsense DIY showing how to replace front struts on a 2008–2012 Honda Accord Coupe EX-L (8th Gen). This is Part [1/2] of the full step-by-step process.
⚙️ No talking, no fluff — just clean, fast-paced footage showing every step.
🔧 Perfect for visual learners, quick refreshers, or those who just want to see how it’s done.
✅ Works for: All 8th Gen Accords (2008–2012) – Coupe & Sedan.
Whether youre a weekend mechanic or saving money on a repair, this short shows it all.
📍Tools, torque specs, and key steps are all shown visually.
📌 Like & sub for more no-talk DIY car content!
#diycarrepair #hondaccord #honda8thgen #strutreplacement #carrepair #mechaniclife #carlovers #autoservice #fixyourcar #carmaintenance #automotiverepair #howtofix #diymechanic #satisfyingcarvideo #suspensionrepair DIY Strut Replacement | 2008–2012 Honda Accord (Front, Part 1)](https://i.ytimg.com/vi/px8JcxepUB4/mqdefault.jpg)
