DJI Phantom with Boscam HD19 Test Flight 3. @Plan-C
DJI Phantom with Boscam HD19 Test Flight 3.  @Plan-C
Uploaded July 2013 | Updated November 2026, 3 hours ago
DJI Phantom with stock everything. Balanced props with a Du Bro, Sellotape and a kebab stick (to make sure pitch is even on spin). Have not touched motors or bearings ... yet ;)

Carrying Boscam HD19 and Boscam 200mw VTX plus Fatshark spironet (not used here). Removed stock GoPro Mount and screws and used velcro with foam backing (£2.50 from lhs) to secure Boscam camera straight onto underside of airframe (one pad with hole cut out for micro sd slot. Then made a thin wrap around strip and used like tape around entire camera and secured back to underside of Phantom to make sure camera is secure. Wires are too long and secured with good, old fashioned Duct Tape for the time being but seem to be holding up well...

Pretty happy with jello considering homemade nature and price of 'mount' (about £3.00). Entire VTX system is powered from the Phantom's aux power cable. I used needle nose pliers to remove the rubber grommet, pull out wire and re-seat grommet. No need to open up shell. Soldered a male jst/bec connector and heatshrinked the joins.

Boscam fits perfectly to underside of Phantom. Camera is 58 grams. Not sure weight of VTX/antenna/Sd card and wires.

Flying line of sight in GPS mode for first half and atti mode for a bit of the low level stuff. 50% battery left after this flight. Love it.

Shot at 1080p about 7pm UK summertime. Great sunlight. Stock lens. Class 4, 8GB micro SD card. Youtube has auto converted so this is half res.

ps - Don't forget to press the stop recording button / shut down camera when you land before you disconnect the flight battery or your movies will be missing headers and will be irrecoverable and not play!

This camera records in '.mov' format. The best player to view you flight videos is VLC imho.

Overall very happy with it so far.

GLA.
DJI Phantom with Boscam HD19 Test Flight 3.Fixing Loose Magnets on Cobra MotorsBlackout Mini H Quad Step-by-Step Full Build Log Part 4Amiga 500 PSU Self-Inflicted Rabbit Hole!DIY C64 EPROM  PLA Board  with FiltersLatest Build - WayneRC PVC T-CopterAcorn A3010 Motherboard RepairAnother Acorn Archimedes A3000 Repair VlogTP Link AV500 Voodoo!?A Few Mini Racing Quad Buildskk2.1.5 T copter rebuildBuild Video Multiwii Pro EZ 3 Foldable Tricopter
Plan C |

DJI Phantom with Boscam HD19 Test Flight 3.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER