Uploaded January 2020 | Updated November 2026, 1 day ago
I made a simple circlar saw guide with a small timber(15mmx30mm)
No special tool is necessary, a handsaw and drill are the only tools you will use to make this.
FIY: I used a finish nailer to attach timbers in the video, you can use any screws instead.
Jig plan convenient for woodworking
[Plan List]
jsk-koubou.stores.jp
I made a simple circlar saw guide with a small timber(15mmx30mm)
No special tool is necessary, a handsaw and drill are the only tools you will use to make this.
FIY: I used a finish nailer to attach timbers in the video, you can use any screws instead.
Jig plan convenient for woodworking
[Plan List]
jsk-koubou.stores.jp



![6 steps for mastering JigSaw / Introducing 9 Hacks! ! !
Here are 6 steps to make JIGSAW easier to use.
If you master the use of a jigsaw, you can freely cut curves that cannot be done with a circular saw.
Click here for the plan
・[Plan]Box type multi jigsaw table
https://jisaku-koubou.com/downloads/multi-jigsaw-table2022
・[Plan]Folding Jigsaw Table Machine
https://jisaku-koubou.com/downloads/folding-jigsaw01
0:00 【01 Hack - Clean Cut】
0:51 【02 Hack - Straight Cut】
3:13【03 Hack - Circle Cut】
5:44【04 Hack - Jig Saw Sander】
8:27【05 Hack - Simple Jig Saw Table】
14:45【06 Hack - Smart Jig Saw Table】
27:48【07 Hack - parallel cut jig】
29:02【08 Hack - Tenon processing jig】
30:29【09 Hack - Multifunctional hand jig】 6 steps for mastering JigSaw / Introducing 9 Hacks! ! !](https://i.ytimg.com/vi/OED7VCJR2aY/mqdefault.jpg)
![DIY vacuum clamp / stand unit
Hello friends.
This is the official channel of JSK-koubou.
Here you can find many interesting videos about homemade machinery, woodworking projects, plans and life hacks.
Click here for the plan
https://jisaku-koubou.com/downloads/vacuum-clamp
I have created a vacuum clamping system that can clamp materials quickly.
It utilizes a device that evacuates using compressed air.
The device that creates the vacuum costs only $ 15.
The vacuum area is 13.9 cm x 13.9 cm
The ultimate vacuum of the vacuum equipment used is -92kPa.
Theoretically, it is possible to chuck with a force of 179 kgf.
It can be adjusted to an angle that is easy to use, and the clamp does not get in the way, so work progresses.
Since it uses a rubber sealing, no clamp marks are left on the wood.
[Plan List]
https://jsk-koubou.stores.jp/ DIY vacuum clamp / stand unit](https://i.ytimg.com/vi/OUJNfhnowog/mqdefault.jpg)

![DIY Sandblasting System / Box Cabinet
I made a sandblast box.
It is used to protect the lungs from dust and to collect and reuse sand media.
↓Click here for details on PVC pipe sandblasting
https://youtu.be/_GzpQlw6UIA
Download the plan from here.
https://jisaku-koubou.com/downloads/plan-sand-blaster
[Plan List]
https://jsk-koubou.stores.jp/
【JIG】
・Extendable Circle Cutting Router Jig
https://youtu.be/2mEV75w6_cQ
・Drill stand
https://youtu.be/n-neSE8mwDg
・Magnet drill stand
https://youtu.be/a2kIJDhhZrg
・Belt sander
https://youtu.be/KaojkUzeEJU
・Making a 2-in-1 Circular Saw Slide Guide (Easy Panel Saw)
https://youtu.be/M1xYKw5FP-0
・How to make Line laser module
https://youtu.be/a5QKe4fZszY
・Workbench
https://youtu.be/cpnR1txnPGM
・Homemade height gauge
https://youtu.be/qdd8Jtsbbcc
・right angle corner clamp
https://youtu.be/yGoMIY325NM DIY Sandblasting System / Box Cabinet](https://i.ytimg.com/vi/PQwlWCpeP7k/mqdefault.jpg)



