I managed to pack everything inside the walnut. @jisakukobo
I managed to pack everything inside the walnut.  @jisakukobo
Uploaded August 2026 | Updated November 2026, 3 days ago
This time, I packed an electronic circuit inside a real walnut shell and turned it into a tiny electronic device.

Inside the limited space, I installed an ESP32-C3, multiple LEDs, an IR receiver, a temperature sensor, a lithium-polymer battery, and other components.

The video covers the entire build process, including shaping the walnut shell, assembling the circuit with surface-mount components, wiring everything with thin magnet wire, uploading the firmware, and measuring power consumption.

Try to guess what it becomes as you watch.

The program and instructions on how to create it are available here.
I would appreciate it if you purchased the program to help support the channel.
jsk-koubou.stores.jp


────────────────────

Spoiler warning: The finished project is revealed below.




The completed device is a homemade smart remote that lets you control household appliances from a smartphone.

Because it can learn signals from infrared remote controls, it can be used with a wide range of appliances, including air conditioners, TVs, lights, and fans.

When connected to the same local Wi-Fi network, it can be controlled through a web interface generated by the ESP32. When you are away from home, it can be operated through a cloud API.

It also includes a temperature sensor, allowing you to check the room temperature remotely and turn on the air conditioner before you get home.

Later in the video, I also show the battery consumption test results and a practical version housed in a 3D-printed case.

Main Features Covered
Machining the walnut shell
A magnetic opening and closing mechanism using neodymium magnets
Building the IR LED and MOSFET circuit
Installing components around the ESP32-C3
Learning infrared remote-control signals
A smartphone-friendly web interface
Remote operation through a cloud API
Checking room temperature with a temperature sensor
Measuring battery consumption
Building a practical version with a 3D-printed case
Assembly Manual

I sell a detailed manual for this smart remote on my website.

It includes the firmware, circuit diagram, parts information, setup instructions, and complete assembly procedure.

It also covers technical details that could not be fully explained in the video.

Assembly Manual and Design Files

jsk-koubou.stores.jp

If you enjoyed the video, please give it a like and subscribe to the channel.

Feel free to leave a comment with your electronics project ideas or anything you would like to see me build in the future.

#Electronics #ESP32 #DIY
I managed to pack everything inside the walnut.DIY Sandblasting System / Box CabinetSafety Hand Push Block for table sawAir Conditioner Cleaning at home:業者不要のプロ並みエアコン掃除‼わずか10秒で作れる完璧な木組みPlay with radio control airplane - Futaba Sky Leaf Classic必見!ルーターが便利になる魔法の15テクニックSDGs!壊れた洗濯機を再利用 DIYに便利なディスク&ベルトサンダーを作るCreating Amazing MDF Multilayer Speakers - $ 3 Speaker ModsHow to make a simple sandblasterEasy and accurate! Create a 45 degree / 90 degree woodworking prototype masterConvert a drill bit to Brad Point
JSK-Studio |

I managed to pack everything inside the walnut.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER