Uploaded February 2015 | Updated November 2026, 1 day ago
Using a LM317 adjustable voltage regulator with simple circuit board that I routed out with a Dremel tool bit on the drill press. I could have etched it but using the drill press was quick and simple. I just kinda eyeballed it.
Thank you for watching!
Using a LM317 adjustable voltage regulator with simple circuit board that I routed out with a Dremel tool bit on the drill press. I could have etched it but using the drill press was quick and simple. I just kinda eyeballed it.
Thank you for watching!










![Running My Homemade Steam Engine on Live Steam From My New Homemade Boiler
Here is my steam engine finally running on real steam! So it is officially a steam engine now! In the beginning I had problems with the piston binding. I thought at first it was because of the oil mixing with steam in the cylinder and making a sticky paste. But even after I cleaned it all out it still binded up. I then sanded the epoxy putty piston down to make it a little smaller. Then it worked great! This is because the thermal expansion coefficient of epoxy is much greater than the thermal expansion coefficient for copper.
The thermal expansion coefficient of JB Weld(essentially what my piston is made out of) is: 48 [(in)/(in) x °F)] x 10(-6) http://www.mombu.com/aviation/aviators/t-epoxy-bonding-to-aluminum-and-magnesium-3587575.html
The thermal expansion coefficient of copper is a mere 9.3 [(in)/(in) x °F)] x 10(-6). http://www.engineeringtoolbox.com/linear-expansion-coefficients-d_95.html
So a huge difference there in thermal expansion coefficients. Explains everything! Optimally I should make the piston and cylinder out of materials that have similar or the same thermal expansion coefficients.
Disclaimer: WARNING! Steam boilers are EXTREMELY DANGEROUS! If you blow yourself up because you tried something I did in this video. I AM NOT LIABLE. If you try anything in this video you do so at YOUR OWN RISK. So dont come whining at me if you get a tomato sauce can(or other boiler shrapnel) permanently embedded in you or all your skin falls off from a steam burn. I warned you. I encourage you to experiment as I am but please be safe and smart and remember that I am not liable for your actions. Thanks!
Thank you for watching! Running My Homemade Steam Engine on Live Steam From My New Homemade Boiler](https://i.ytimg.com/vi/kcHVOlkaJ0I/mqdefault.jpg)