maker.moekoe | DIY motorized Camera Slider with oled controller | Full build @makermoekoe | Uploaded May 2020 | Updated October 2024, 3 hours ago.
How to build a simple but very handy motorized camera slider based on the Openbuilds/Vslot system. Just four 3D printed parts are needed to get this very useful camera equipment.

More Informations can be found here: instructables.com/id/DIY-Motorized-Camera-Slider-From-Four-3D-Printed-P

The threaded inserts which I have used in this video are from RUTHEX
Ruthex threaded insert bundle M3/M4/M5: amzn.to/39B1it9 (*)
Ruthex M3 threaded inserts: amzn.to/3bHFDRs (*)
Ruthex M4 threaded inserts: amzn.to/2QTXkVN (*)
Ruthex M5 threaded inserts: amzn.to/2ypTRbf (*)

The 3D printed BOSCH battery jack can be found here: thingiverse.com/thing:4283438

Website: makermoekoe.com
Instagram: instagram.com/maker.moekoe
Instructables: https://www.instructables.com/member/...

My commonly used tools:
DIY Hotplate Soldering Iron: makermoekoe.com/2020/04/28/maker-moekoes-kind-of-soldering-iron
Yellow Third hand: amzn.to/2JqTNuc (*)
Reflow gun: amzn.to/349QsYX (*)
Paste Dispenser: https://www.aliexpress.com/item/32834...
Soldering Mat: amzn.to/2w2smUs (*) or amzn.to/2Pnx46B (*)
More can be found here: makermoekoe.com/tools-and-stuff-in-the-lab

My camera equipment:
Camera: amzn.to/35sIGeg (*)
Microphone: amzn.to/3aZm2vq (*)
Camera clamps: amzn.to/2zUBYSF (*)
Mini tripods: amzn.to/35vCoe2 (*)
LED panel: amzn.to/35tbgfG (*)

The links which are marked with a star (*) are affiliate links. This has either no effect on the product nor on its price, but by using this link I will get a small provision.

Music from:
epidemicsound.com