DIY Modern Hat Rack || Quick Cuts @BrothersMake
DIY Modern Hat Rack || Quick Cuts  @BrothersMake
Uploaded August 2019 | Updated November 2026, 7 hours ago
We're working on the edit for our next big build, so in the mean time we figured we'd make a quick hat rack to organise Matt's cap collection a little better.

We used some scrap 18mm birch plywood and cut it to fit the slightly awkward space on the wall. We drilled angled holes for the dowels to help stop the hats from falling off. We also edge-banded the plywood with some pine strips to help hide the exposed edge. We gave the whole thing a coat of spray varnish and the dowels were painted white. We also added a thin piece of plywood behind to give a shadow gap against the wall. This just adds a little bit of depth to the project rather than have it sit flat on the wall. By doing this we also managed to avoid having any exposed screws. Instead, we used VHB tape to stick the hat rack to the backing piece.

Hope you enjoyed the project! Stay tuned for our dining table project coming in a few weeks.

Consider supporting us on PATREON:
patreon.com/brothersmake

Follow us on INSTAGRAM:
instagram.com/brothersmake

Link to our MERCH store:
teespring.com/en-GB/stores/brothersmake

STARBOND SUPERGLUE 10% off using BROTHERSMAKE10 or click the link below:
starbond.com/?rfsn=3704868.592ffa8

Music:
'Toe Jam' - Diamond Ortiz
DIY Modern Hat Rack || Quick CutsJewellery made from 100% Recycled Plastic Waste | HDPE PendantsGiving Trash a Second ChanceKids Bedroom Storage - Small Space IdeasHow to make an AXE from Recycled Plastic | HDPE Hatchet HandleTurning 3D Printing Waste into a SkullThe Barbie BrickHow We Recycle Toothpaste Tubes 🦷♻️Are Plastic Bags REALLY that Bad for the Planet?New Stool from Old TrashPlant Pots made from Recycled PlasticYour First Recycled Plastic Project
Brothers Make |

DIY Modern Hat Rack || Quick Cuts

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER