Uploaded March 2025 | Updated November 2026, 3 hours ago
Inspired by a 'LockPickingLawyer' video, I set out to make my own fiber optic inspection light using an 'OLight OClip Pro' torch and some inexpensive silica-core fibre. With a simple 3D-printed adapter designed in OpenSCAD, I created a flexible, focused light perfect for inspecting locks, carburetors, and other small parts. In this video, I walk you through the build process and demonstrate its practical uses. Very helpful if you need to use a magnifier (or camera) but can't position a conventional light source without shadows.
Watch to see how easy it is to make your own!
The STL & OpenSCAD files are available on Thingiverse here :-
thingiverse.com/thing:6976970
Inspired by a 'LockPickingLawyer' video, I set out to make my own fiber optic inspection light using an 'OLight OClip Pro' torch and some inexpensive silica-core fibre. With a simple 3D-printed adapter designed in OpenSCAD, I created a flexible, focused light perfect for inspecting locks, carburetors, and other small parts. In this video, I walk you through the build process and demonstrate its practical uses. Very helpful if you need to use a magnifier (or camera) but can't position a conventional light source without shadows.
Watch to see how easy it is to make your own!
The STL & OpenSCAD files are available on Thingiverse here :-
thingiverse.com/thing:6976970










