Uploaded September 2026 | Updated November 2026, 3 days ago
This course covers the calculations, procedures, and documentation required to complete an ACCA Manual D duct design. Participants will learn how to calculate friction rate, determine total equivalent length, size ducts using the velocity method, and properly balance supply and return air systems.
The course will also explain how duct fittings, static pressure, and equipment airflow affect overall system performance, comfort, efficiency, and noise levels. Attendees will gain a practical understanding of how to translate Manual J and Manual S results into a complete duct design that delivers the required airflow to each room.
How can modern software streamline duct design and ensure better-performing HVAC systems, Code Compliance, and Energy Star, LEED, and Passive House Certification?
Submitted for 1 (One) Hour Continuing Education Units (CEUS) in
• Green Business Certification Inc. (GBCI) - LEED Accredited Professional Homes (APH)
• American Institute of Architects - AIA (HSW)**
• Building Performance Institute (BPI) - All Credentials
• Passive House US, PHIUS - CPHC, Builder, Rater & Verifier
• GHI Certified GreenHome Professional (CGHP) Pillar(s): Energy, Health, Materials
• American Institute of Building Designers (AIBD)
• Building Science Institute (BSI) Verifier
• Society of American Registered Architects (SARA)
**State Architect / Builder License may be applicable
Need CEUS?
Take the Quiz here:
greenhomeinstitute.thinkific.com/courses/diy-manual-d-duct-design-simulations-for-better-hvac-performance
Speaker
Bill Fiore is a Mechanical Engineer with more than 24 years of experience in the HVAC industry. He holds an MBA in Entrepreneurship from Babson College, is a Certified Management Accountant (CMA), and has extensive experience in software development, eCommerce, and business operations.
In 2014, Bill founded Cool Calc with the goal of making HVAC contractors more efficient while helping address the industry's growing labor shortage. What began as a proof of concept has grown into one of North America's leading HVAC design platforms, serving more than 150,000 users across the United States and Canada.
Bill is passionate about simplifying complex engineering concepts and making advanced HVAC design accessible to contractors of all experience levels. His unique combination of engineering, business, and software expertise has enabled him to develop tools that transform sophisticated calculations into intuitive, easy-to-use workflows.
Outside of Cool Calc, Bill is an artist, woodworker, and founder of a nonprofit organization focused on reducing carbon emissions and promoting alternative energy. He views Cool Calc as an extension of that mission, helping contractors design properly sized HVAC systems that improve comfort, reduce energy consumption, and lower environmental impact.
Lessons Learned
1. Understand that balanced supply and return airflows are crucial for maintaining indoor health by ensuring proper ventilation and air quality in living spaces for achieving Phius and LEED v4 BD+C Homes EA Prerequisite Minimum Energy Performance.
2. Analyze the influence of duct fittings on system pressure loss to enhance safety by minimizing the risk of system failures and ensuring efficient operation.
3. Introduce the velocity method for duct sizing to promote welfare by optimizing energy efficiency and comfort in HVAC systems for occupants, thus achieving Phius and LEED v4 BD+C Homes EA Prerequisite Minimum Energy Performance.
4. Articulate the importance of static pressure calculations to ensure the effective performance of the duct system, which contributes to a healthier and more comfortable environment that achieves Phius and LEED v4.1 Residential EA Prerequisite Minimum Energy Performance.
This course covers the calculations, procedures, and documentation required to complete an ACCA Manual D duct design. Participants will learn how to calculate friction rate, determine total equivalent length, size ducts using the velocity method, and properly balance supply and return air systems.
The course will also explain how duct fittings, static pressure, and equipment airflow affect overall system performance, comfort, efficiency, and noise levels. Attendees will gain a practical understanding of how to translate Manual J and Manual S results into a complete duct design that delivers the required airflow to each room.
How can modern software streamline duct design and ensure better-performing HVAC systems, Code Compliance, and Energy Star, LEED, and Passive House Certification?
Submitted for 1 (One) Hour Continuing Education Units (CEUS) in
• Green Business Certification Inc. (GBCI) - LEED Accredited Professional Homes (APH)
• American Institute of Architects - AIA (HSW)**
• Building Performance Institute (BPI) - All Credentials
• Passive House US, PHIUS - CPHC, Builder, Rater & Verifier
• GHI Certified GreenHome Professional (CGHP) Pillar(s): Energy, Health, Materials
• American Institute of Building Designers (AIBD)
• Building Science Institute (BSI) Verifier
• Society of American Registered Architects (SARA)
**State Architect / Builder License may be applicable
Need CEUS?
Take the Quiz here:
greenhomeinstitute.thinkific.com/courses/diy-manual-d-duct-design-simulations-for-better-hvac-performance
Speaker
Bill Fiore is a Mechanical Engineer with more than 24 years of experience in the HVAC industry. He holds an MBA in Entrepreneurship from Babson College, is a Certified Management Accountant (CMA), and has extensive experience in software development, eCommerce, and business operations.
In 2014, Bill founded Cool Calc with the goal of making HVAC contractors more efficient while helping address the industry's growing labor shortage. What began as a proof of concept has grown into one of North America's leading HVAC design platforms, serving more than 150,000 users across the United States and Canada.
Bill is passionate about simplifying complex engineering concepts and making advanced HVAC design accessible to contractors of all experience levels. His unique combination of engineering, business, and software expertise has enabled him to develop tools that transform sophisticated calculations into intuitive, easy-to-use workflows.
Outside of Cool Calc, Bill is an artist, woodworker, and founder of a nonprofit organization focused on reducing carbon emissions and promoting alternative energy. He views Cool Calc as an extension of that mission, helping contractors design properly sized HVAC systems that improve comfort, reduce energy consumption, and lower environmental impact.
Lessons Learned
1. Understand that balanced supply and return airflows are crucial for maintaining indoor health by ensuring proper ventilation and air quality in living spaces for achieving Phius and LEED v4 BD+C Homes EA Prerequisite Minimum Energy Performance.
2. Analyze the influence of duct fittings on system pressure loss to enhance safety by minimizing the risk of system failures and ensuring efficient operation.
3. Introduce the velocity method for duct sizing to promote welfare by optimizing energy efficiency and comfort in HVAC systems for occupants, thus achieving Phius and LEED v4 BD+C Homes EA Prerequisite Minimum Energy Performance.
4. Articulate the importance of static pressure calculations to ensure the effective performance of the duct system, which contributes to a healthier and more comfortable environment that achieves Phius and LEED v4.1 Residential EA Prerequisite Minimum Energy Performance.










