Uploaded July 2022 | Updated September 2026, 2 weeks ago
This video explains how Panasonic Lumix camera remote triggers actually work, and how to build a DIY timelapse or shutter trigger cable for GH5, GH6, GH7, S1, S1II, S1IIR, G9, and other Lumix cameras!
Panasonic Lumix cameras use a resistor-based remote trigger system, which is why many off-the-shelf shutter cables do not work correctly for still photos or timelapse.
In this video, I break down:
- How Lumix remote triggers actually work
- Why some cables only start and stop video recording
- How to build your own DIY Lumix timelapse or shutter trigger cable
- How this applies to timelapse, interval shooting, light triggers, motion triggers, microswitches, Arduino projects, and more
While this demo uses a resin 3D printer as the trigger source, the wiring and principles apply to any custom trigger method, not just ResinLapse!
⚠️ Camera Compatibility Notes:
- This method applies to many Panasonic Lumix cameras, including: GH5, GH6, G9, GH7, S1, S1II, FZ series, S9 and others that use the 2.5mm TRRS remote port.
If you are using Canon or Nikon cameras, their remote trigger systems are different and do not require resistor encoding.
📚 Remote Trigger Reference (Highly Recommended):
- Build custom trigger cables for many camera brands using this pinout reference:
web.archive.org/web/20250117134426/https://www.doc-diy.net/photo/remote_pinout (No affiliation)
------------------------------------------------------------------------------------------------
Parts & Tools List (Affiliate Links):
Lumix Cameras: bhpho.to/4pLMora
PhotoResistors: amzn.to/3AExLA6
4 Pole 2.5mm Jack: amzn.to/3yrc8Aw
Resistor Asst.: amzn.to/3yU7igx
Heatshrink Asst.: amzn.to/3RkYSpz
22ga Wire Kit: amzn.to/3c60Z0t
3rd Hand Solder Stand: amzn.to/3Iq9HTf
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
⏱️ Timestamps
0:00 – Intro
0:52 – Disclaimer
1:23 – Parts Needed
2:40 – How Lumix Remote Triggers Work
2:58 – Wiring Diagram
3:15 – Making the Cable
6:01 – Installing the Trigger
7:03 – Patron Shout-Outs
7:34 – Camera Testing
8:41 – Camera Settings Notes
9:14 – Other Camera Brands
9:44 – Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #3DPrinter
This video explains how Panasonic Lumix camera remote triggers actually work, and how to build a DIY timelapse or shutter trigger cable for GH5, GH6, GH7, S1, S1II, S1IIR, G9, and other Lumix cameras!
Panasonic Lumix cameras use a resistor-based remote trigger system, which is why many off-the-shelf shutter cables do not work correctly for still photos or timelapse.
In this video, I break down:
- How Lumix remote triggers actually work
- Why some cables only start and stop video recording
- How to build your own DIY Lumix timelapse or shutter trigger cable
- How this applies to timelapse, interval shooting, light triggers, motion triggers, microswitches, Arduino projects, and more
While this demo uses a resin 3D printer as the trigger source, the wiring and principles apply to any custom trigger method, not just ResinLapse!
⚠️ Camera Compatibility Notes:
- This method applies to many Panasonic Lumix cameras, including: GH5, GH6, G9, GH7, S1, S1II, FZ series, S9 and others that use the 2.5mm TRRS remote port.
If you are using Canon or Nikon cameras, their remote trigger systems are different and do not require resistor encoding.
📚 Remote Trigger Reference (Highly Recommended):
- Build custom trigger cables for many camera brands using this pinout reference:
web.archive.org/web/20250117134426/https://www.doc-diy.net/photo/remote_pinout (No affiliation)
------------------------------------------------------------------------------------------------
Parts & Tools List (Affiliate Links):
Lumix Cameras: bhpho.to/4pLMora
PhotoResistors: amzn.to/3AExLA6
4 Pole 2.5mm Jack: amzn.to/3yrc8Aw
Resistor Asst.: amzn.to/3yU7igx
Heatshrink Asst.: amzn.to/3RkYSpz
22ga Wire Kit: amzn.to/3c60Z0t
3rd Hand Solder Stand: amzn.to/3Iq9HTf
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
⏱️ Timestamps
0:00 – Intro
0:52 – Disclaimer
1:23 – Parts Needed
2:40 – How Lumix Remote Triggers Work
2:58 – Wiring Diagram
3:15 – Making the Cable
6:01 – Installing the Trigger
7:03 – Patron Shout-Outs
7:34 – Camera Testing
8:41 – Camera Settings Notes
9:14 – Other Camera Brands
9:44 – Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #3DPrinter
