Uploaded August 2022 | Updated September 2026, 2 weeks ago
Folks have often asked, "What is the cheapest computer I can use for 3D Printing?", so I set out to answer that question for the 3D Printing Community! This Samsung $70 Chromebook is by no means a powerful Computer, but can it be used to run a 3D printer and even 3D design custom parts? We will use AutoDesk TinkerCAD and Kiri:Moto for our 3D Design software and Slicing Software. No Linux rooting or dev menus in this tutorial!
AutoDesk TinkerCad: tinkercad.com
Kiri:Moto Web based Slicer: https://grid.space/kiri/
Stained Glass by: instagram.com/seaofdoom
TimeStamps:
0:00 - Intro
0:58 - $70 ChromeBook?!
1:56 - What are we designing?
2:23 - Equipment Recommendations
2:40 - TinkerCad Basics
3:46 - Designing in TinkerCad
9:31 - Kiri:Moto Intro
9:53 - Using Kiri:Moto
14:25 - G-Code to the SD Card
15:05 - TO THE PRINTER!
15:39 - Hanging the Stained Glass!
16:05 - Conclusion
16:24 - Outro
Gameplay at start from: "The Outer Worlds" by Obsidian Studios
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Affiliate Links:
*** Polymaker Filament: https://us.polymaker.com?aff=28
*** E3D Products: e3d-online.com/?aff=23
*** Starter 3D Printer: amzn.to/3QCwbU9
*** Large 3D Printer: amzn.to/3ThBZEH
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
Folks have often asked, "What is the cheapest computer I can use for 3D Printing?", so I set out to answer that question for the 3D Printing Community! This Samsung $70 Chromebook is by no means a powerful Computer, but can it be used to run a 3D printer and even 3D design custom parts? We will use AutoDesk TinkerCAD and Kiri:Moto for our 3D Design software and Slicing Software. No Linux rooting or dev menus in this tutorial!
AutoDesk TinkerCad: tinkercad.com
Kiri:Moto Web based Slicer: https://grid.space/kiri/
Stained Glass by: instagram.com/seaofdoom
TimeStamps:
0:00 - Intro
0:58 - $70 ChromeBook?!
1:56 - What are we designing?
2:23 - Equipment Recommendations
2:40 - TinkerCad Basics
3:46 - Designing in TinkerCad
9:31 - Kiri:Moto Intro
9:53 - Using Kiri:Moto
14:25 - G-Code to the SD Card
15:05 - TO THE PRINTER!
15:39 - Hanging the Stained Glass!
16:05 - Conclusion
16:24 - Outro
Gameplay at start from: "The Outer Worlds" by Obsidian Studios
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Affiliate Links:
*** Polymaker Filament: https://us.polymaker.com?aff=28
*** E3D Products: e3d-online.com/?aff=23
*** Starter 3D Printer: amzn.to/3QCwbU9
*** Large 3D Printer: amzn.to/3ThBZEH
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
