Uploaded April 2025 | Updated September 2026, 2 weeks ago
Having trouble with 3D Prints falling over or having poor print quality due to wobbling prints? Paint on Supports in your slicer! Even if the print doesn't "Need" supports, they can add stability by providing more surface area in contact with the bed and help to support the print while it is being 3d printed!
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/4avDFmt
*** Video Recorder: bhpho.to/3Oa4qmZ
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/48YMmnD
*** Studio Microphone: bhpho.to/4216F1z
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/3S77IbO
*** Drone: bhpho.to/423XrS6
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.
#mandicreally
Having trouble with 3D Prints falling over or having poor print quality due to wobbling prints? Paint on Supports in your slicer! Even if the print doesn't "Need" supports, they can add stability by providing more surface area in contact with the bed and help to support the print while it is being 3d printed!
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/4avDFmt
*** Video Recorder: bhpho.to/3Oa4qmZ
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/48YMmnD
*** Studio Microphone: bhpho.to/4216F1z
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/3S77IbO
*** Drone: bhpho.to/423XrS6
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.
#mandicreally
