Uploaded February 2018 | Updated November 2026, 3 hours ago
Here you see as we get the quartz counters installed, and as we prep for and ultimately install our subway tile.
We had to prepare the backsplash walls before the counters could be installed, and that involved removing the existing tile and either repairing the plaster underneath or just ripping it out and replacing it with backer board.
We wanted a natural stone tile at first, but then we decided on a gray subway tile. For a number of reasons, that was a great decisions:
1. Style. They look amazing!
2. Simplicity. Subway tile is easy to install. The natural stone isn't as easy.
3. Price. We saved money doing this.
We hit a major hiccup in the installation, which was that I had not accounted for a height different between two counters, so it resulted in a wave in the tiling. I had to RIP IT ALL OUT and start over. Fortunately, it was still drying, and although it was frustrating and I had to find a creative solution, it was the 100% correct decision. To this day, you can't tell the difference. NO ONE has ever noticed the clever fix I did (cut about 1/8" or so off the bottom of some tiles).
Thanks for watching!
Andrew
---
Music
Old Bossa by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: twinmusicom.org
Here you see as we get the quartz counters installed, and as we prep for and ultimately install our subway tile.
We had to prepare the backsplash walls before the counters could be installed, and that involved removing the existing tile and either repairing the plaster underneath or just ripping it out and replacing it with backer board.
We wanted a natural stone tile at first, but then we decided on a gray subway tile. For a number of reasons, that was a great decisions:
1. Style. They look amazing!
2. Simplicity. Subway tile is easy to install. The natural stone isn't as easy.
3. Price. We saved money doing this.
We hit a major hiccup in the installation, which was that I had not accounted for a height different between two counters, so it resulted in a wave in the tiling. I had to RIP IT ALL OUT and start over. Fortunately, it was still drying, and although it was frustrating and I had to find a creative solution, it was the 100% correct decision. To this day, you can't tell the difference. NO ONE has ever noticed the clever fix I did (cut about 1/8" or so off the bottom of some tiles).
Thanks for watching!
Andrew
---
Music
Old Bossa by Twin Musicom is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: twinmusicom.org










